Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 50-116-9 specification
The length of a straight line which passes through the center of a flange,and terminates at the circumference.
0.485in. and 0.495in.
The national stock number or the identification information of the end equipment for which the item is a part.
V-22; fairing installation; panel installation
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
feat
A measurement of the smallest dimension of the flange, in distiction from length or width.
0.008in. and 0.017in.
0.257in. and 0.261in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the insert.
flush flange
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
grommet, protruding head (for use in CA384027 nut plate assembly)
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
essential to weapon system performance or operation, or the preservation of life or safety of operating personnel
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
Answers.
1EA
Steel corrosion resisting
Schedule B number: 9607190000
nmfc 095190
Slide fasteners
FSC 5325 ⁓ Fastening devices
NSN 5325-01-530-2476 INSERT,PANEL FASTENER
Used on v-22; fairing installation; panel installation. passivate surface treated essential to weapon system performance or operation, or the preservation of life or safety of operating personnel grommet, protruding head (for use in CA384027 nut plate assembly)
- NIIN
- 015302476
- NIIN Date
- 05/19/05
- Schedule B
- 9607190000
- Name Code
- 37444
- FIIG
- A05400
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $69.40 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | CA358036-9 | Cage 29372 |
| 2. | 123004-9 | Cage 60119 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for 50-116-9 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI
- UFC (universal freight code)
- 49790
Similar by Design Other inserts with similar characteristics
Nothing similar to this part number was found in our inventory
50-116-9 / Insert,panel fastenerWhat is the formal definition of this item?
An insert which must have a hole that may be internally threaded with a flange on one end. it may have an undercut on the end opposite the flange to provide a shoulder to allow for mating with another insert. pre-assembled items will consist of an expansion sleeve and a body which may be flared. internally threaded items may have a self-locking feature. excludes insert, screw thread.
