Fasteners. 1,243,340 NSN and commercial part numbers

Home » Catalog » Fasteners (Page 1303)
Part Number
NSN
INC
Category
NSN 5320-01-520-9508
00864
See more Blind Rivets
Used on f18e aircraft in support of ecp 6038. countersunk w/protruding stud head style navy) : fastener-blind, internal thread, 100 degree head, bulb sleeve passivate sleeve surface treated
NSN 5320-01-520-9507
00864
See more Blind Rivets
Used on f-18 e/f hornet aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.750" grip length passivate bolt surface treated
NSN 5320-01-520-9505
00864
See more Blind Rivets
Used on f-18 e/f hornet aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.750" grip length passivate bolt surface treated
NSN 5320-01-520-9504
00864
See more Blind Rivets
Used on f-18 e/f hornet aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.750" grip length passivate bolt surface treated
NSN 5320-01-520-9503
00864
See more Blind Rivets
Used on f-18 e/f hornet aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.250" grip length passivate bolt surface treated
NSN 5320-01-520-9502
00864
See more Blind Rivets
Used on f-18 e/f hornet aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.650" grip length passivate bolt surface treated
NSN 5320-01-520-9501
00864
See more Blind Rivets
Used on f-18 e/f hornet aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.200" grip length passivate bolt surface treated
NSN 5320-01-520-9500
00864
See more Blind Rivets
Used on f-18 e/f hornet aircraft. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.150" grip length passivate bolt surface treated
NSN 5320-01-520-9497
00864
See more Blind Rivets
Used on f/a-18e/f applications. (navy) blind rivet, aircraft used for lex inlet & nose barrel; fasterner, blind bolt, high strength, mechanically locked, titanium, counter sunk tension head; includes sleeve, pin, mechanical lock
NSN 5305-01-520-9492
19665
Used on control assembly. (navy) screw, panel fastener
NSN 5305-01-520-9483
77777
Set Cup Point Screws
NSN 5305-01-520-9469
77777
Aircr Crt Screw Sets
NSN 5325-01-520-9458
06314
passivate surface treated
NSN 5306-01-520-9457
77777
Aircraft Ma Rod Ends
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil).
NSN 5320-01-520-9438
00864
See more Blind Rivets
NSN 5320-01-520-9425
00864
See more Blind Rivets
hexagon head style 0.407" grip length t in part number equals partially disassembled fastener for sealant or retaining compound applications
NSN 5320-01-520-9423
67165
See more Pin-rivets
3a thread class right-hand straight pan head style 0.125" grip length 32 thread quantity per inch 0.325 inch thread on stud end; head protrudes 0.125" on pin grip end unjf thread series
NSN 5320-01-520-9412
67165
See more Pin-rivets
3a thread class right-hand straight pan head style 0.250" grip length 32 thread quantity per inch 0.325 inch thread on stud end; head protrudes 0.250" on pin grip end unjf thread series
NSN 5320-01-520-9407
67166
3b thread class right-hand 28 thread quantity per inch unjf thread series
NSN 5305-01-520-9406
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 0.250" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw intended for applications which require the six lobe recess; has undrilled shank aluminum surface treated unjf thread series
NSN 5305-01-520-9405
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 1.625" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw intended for applications which require the six lobe recess; has undrilled shank aluminum surface treated unjf thread series
NSN 5305-01-520-9404
06657
See more Machine Screws
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.769" thread length flat countersunk head style 28 thread quantity per inch screw, 100 degree flush head, full thread, 6 lobe recess passivate screw surface treated unjf thread series
NSN 5320-01-520-9403
00864
See more Blind Rivets
Used on f/a-18e/f. hexagon head style navy) rivet, blind aluminum nut surface treated
NSN 5305-01-520-9402
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 0.625" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw intended for applications which require the six lobe recess; has undrilled shank aluminum surface treated unjf thread series
NSN 5305-01-520-9401
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 1.188" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw intended for applications which require the six lobe recess; has undrilled shank aluminum surface treated unjf thread series
NSN 5305-01-520-9400
06657
See more Machine Screws
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class 0.545" thread length flat countersunk head style 32 thread quantity per inch screw, 100 degree flush head, full thread, six lobe recess passivate screw surface treated unjf thread series
3M1245C3L13A Pin-rivet
3M1245C3L13A
NSN 5320-01-520-9399
67165
See more Pin-rivets
Used on f18 e/f. 3a thread class right-hand flush countersunk head style 0.808" grip length 32 thread quantity per inch pin, rivet, flutted threads-tension, 100 degree c'sunk, hex point drive passivate surface treated unjf thread series
NSN 5305-01-520-9398
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 1.000" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw is intended for applications which require the six lobe recess; has undrilled shank cadmium surface treated unjf thread series
NSN 5305-01-520-9397
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 1.000" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw intended for applications which require the six lobe recess; has undrilled shank aluminum surface treated unjf thread series
NSN 5305-01-520-9396
77777
Shear Aircraf Screws
Used on mv-22 (v-22 lrip 1 e-nsn isil.
NSN 5305-01-520-9395
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 0.625" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw is intended for applications which require the six lobe recess; has undrilled shank cadmium surface treated unjf thread series
NSN 5305-01-520-9393
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 0.312" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw is intended for applications which require the six lobe recess; has undrilled shank passivate surface treated unjf thread series
NSN 5305-01-520-9392
77777
Aircraft Mate Screws
Used on mv-22 (v-22 lrip 1 e-nsn isil.
NSN 5305-01-520-9391
29294
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil). 3a thread class right-hand 0.260" thread length flat countersunk head style 0.188" grip length 32 thread quantity per inch screw, shear, flat 100 deg head, close tolerance, short thread, six lobe recess, 95 ksi fsu this screw is intended for applications which require the six lobe recess; has undrilled shank passivate surface treated unjf thread series
NSN 5307-01-520-9390
77777
M Aircraft Hex Studs
Used on mv-22 aircraft (v-22 lrip 1 e-nsn isil).
NSN 5305-01-520-9389
29294
Used on mv-22 (v-22 lrip1). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.562" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu paint surface treated unjf thread series
NSN 5305-01-520-9386
29294
Used on mv-22 (v-22 lrip1). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.375" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu paint surface treated unjf thread series
NSN 5305-01-520-9385
29294
Used on mv-22 (v-22 lrip1). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.125" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu paint surface treated unjf thread series
NSN 5305-01-520-9384
29294
Used on mv-22 (v-22 lrip1). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.312" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu paint surface treated unjf thread series
NSN 5305-01-520-9383
29294
Used on mv-22 (v-22 lrip1). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.250" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu paint surface treated unjf thread series
NSN 5305-01-520-9381
29294
Used on mv-22 (v-22 lrip1). 3a thread class right-hand 0.298" thread length undercut pan no. 2 head style 0.375" grip length 28 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu cadmium surface treated unjf thread series
NSN 5305-01-520-9379
29294
Used on mv-22 (v-22 lrip1). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.188" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu paint surface treated unjf thread series
NSN 5305-01-520-9378
29294
Used on mv-22 (v-22 lrip 1 e-nsn isil. 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.125" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu cadmium surface treated unjf thread series
NSN 5305-01-520-9376
29294
Used on mv-22 (e-nsn isil). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.938" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu cadmium surface treated unjf thread series
NSN 5305-01-520-9375
29294
Used on mv-22 (e-nsn isil). 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.250" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu passivate surface treated unjf thread series
NSN 5305-01-520-9374
29294
Used on mv-22 (v-22 lrip 1 e-nsn isil. 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.125" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu passivate surface treated unjf thread series
NSN 5320-01-520-9373
00864
See more Blind Rivets
Used on f/a-18 applications. (navy) blind rivet, aircraft fasterner, blind bolt, high strength, mechanically locked, titanium, counter sunk tension head; includes sleeve, pin, mechanical lock
NSN 5305-01-520-9372
29294
Used on mv-22 (v-22 lrip 1 e-nsn isil. 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.062" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu passivate surface treated unjf thread series
NSN 5305-01-520-9371
29294
Used on mv-22 (v-22 lrip 1 e-nsn isil. 3a thread class right-hand 0.260" thread length undercut pan no. 2 head style 0.062" grip length 32 thread quantity per inch screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu passivate surface treated unjf thread series
3M1246V3L11A Pin-rivet
3M1246V3L11A
NSN 5320-01-520-9369
67165
See more Pin-rivets
3a thread class right-hand flush countersunk head style 0.683" grip length 32 thread quantity per inch unjf thread series