Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.260in. ⁓17/64"
0.465in. ⁓15/32"
undercut pan no. 2
0.547in.
0.127in. ⁓9/64"
0.155in.
0.189in.
torx
MV-22 (V-22 lrip 1 E-Nsn isil
0.190in. (UTS #10)
0.062in.
32
3180 pounds per square inch
screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu
iron alloy 660
ams 5731 fed spec 1st material response or ams 5732 fed spec 2nd material response or ams 5737 fed spec 3rd material response or ams 5853 fed spec 4th material response
passivate
AMS-QQ-P-35 fed spec single treatment response
unjf
1EA
Unjf
Iron alloy 660
32
0.062 inches
Undercut pan no. 2
0.260 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
Used on mv-22 (v-22 lrip 1 e-nsn isil. unjf thread series passivate surface treated screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu 32 thread quantity per inch 0.062" grip length undercut pan no. 2 head style 0.260" thread length right-hand 3a thread class
1. | 120-259E3-2 | Cage 97499 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.