Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS35489-56S specification
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.
45.0 shore durometer a and 55.0 shore durometer a
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.500in. ⁓1-1/2"
A measurement taken at right angles to the length of a groove,in distinction from thickness.
0.125in.
A measurement of the smallest dimension of a flange,in distinction from length or width.
0.1875in.
The distance measured in a straight line from the bottom to the top of an item.
0.500in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the grommet.
round
2.125in.
1.750in.
Indicates the type of design used in constructing the grommet.
solid
Those features,not otherwise specified,which may be required for proper functioning of the item.
coolant resistant
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzx
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
hot oil resistant
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
any acceptable
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber synthetic
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-STD-417, grade SB-515-A1, B1, C2, E3, F2 mil std single material response
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.
as differentiated by packaging in accordance with MIL-P-23199 and material conforming to ships parts control center special quality control provisions
Answers.
1EA
Rubber synthetic
1.500 inches
Schedule B number: 9606100000
nmfc 000000
Press-fasteners, snap-fasteners & press-studs & parts therefor
FSC 5325 ⁓ Fastening devices
NSN 5325-01-051-1855 GROMMET,NONMETALLIC
hot oil resistant 1.500" hole diameter
- NIIN
- 010511855
- NIIN Date
- 11/25/77
- Schedule B
- 9606100000
- Name Code
- 33729
- FIIG
- A05400
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1.35 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS35489-56 | Cage 96906 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Department of The Navy
- - U.s. Marine Corps
- - Poland
- - Spain
- - Republic of Korea
- - United Kingdom
- - Greece
Availability for MS35489-56S A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- No rating
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 000000 NO NMFC FREIGHT DESCRIPTION
- UFC (universal freight code)
- 00000
Similar by Design Other grommets with similar characteristics
Nothing similar to this part number was found in our inventory
MS35489-56S / Grommet,nonmetallicWhat is the formal definition of this item?
An item of any peripheral shape having flanges or groove(s) on its outer perimeter to provide a self-retaining characteristic when inserted in a hole, clamp, or the like. designed for the purpose of protecting and/or insulating wires, cables and other items passing through it. excludes bushing, nonmetallic; bumper; and insulator bushing.
