WHS10F8TPKL16GY

WHS10F8TPKL16GY Machine Screw
Home » Catalog » Fasteners (p. 437) » Machine Screws (p. 53) » Part Number WHS10F8TPKL16GY

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. WHS10F8TPKL16GY specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.47in. and 0.50in. ⁓1/2"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.47in. and 0.50in. ⁓1/2"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

round extended washer

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.365in. and 0.385in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.089in. and 0.099in. ⁓7/64"

Extended Washer Diameter

0.428in. and 0.448in.

Extended Washer Thickness

0.025in. and 0.030in.

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

cross recess type 1

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.1900in. (UTS #10)

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.

titanium alloy uns R56400

Screw Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.

ams 4928 assn std single material response or ams 4967 assn std single material response

Bearing Surface Of Head Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the bearing surface of head is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum

Head Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the head is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum

Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum

Shank Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the shank is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum

Bearing Surface Of Head Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the bearing surface of head.

BMS10-85, type 1, class a mfr ref single treatment response

Head Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the head.

BMS10-85, type 1, class a mfr ref single treatment response

Screw Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.

BMS10-85, type 1, class a mfr ref single treatment response

Shank Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type class,grade,and the like,that identifies the surface treatment material of the shank.

BMS10-85, type 1, class a mfr ref single treatment response

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

the top of the screw head shall be coated with a thermosetting epoxy material. the epoxy is lusterless gray in color. the epoxy is per document D-14080.

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What type of screw surface treatment?

Aluminum

What is the thread quantity per inch?

32

What is the head style?

Round extended washer

What is the thread length?

0.47 inches minimum and 0.50 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for WHS10F8TPKL16GY?

5305-01-611-7878

How is this classified for shipping?

Schedule B number: 8108908000
Other wrought titanium

What's the federal classification of WHS10F8TPKL16GY?

FSC 5305 ⁓ Screws

NSN 5305-01-611-7878 SCREW,MACHINE

unjf thread series the top of the screw head shall be coated with a thermosetting epoxy material. the epoxy is lusterless gray in color. the epoxy is per document d-14080. aluminum screw surface treated 32 thread quantity per inch round extended washer head style 0.47" thread length right-hand 3a thread class

NIIN
016117878
NIIN Date
09/25/12
Schedule B
8108908000 
Name Code
06657
FIIG
A500D0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. BACS12FA3K8GA Cage 81205

Major End Users Countries and entities

  • - Australia 
  • - Republic of Korea 

Availability for WHS10F8TPKL16GY A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

WHS10F8TPKL16GY / Screw,machineWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.