NAS8003-9

NAS80039 Machine Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS8003-9 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.470in. and 0.562in. ⁓9/16"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.532in. and 0.562in. ⁓9/16"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

pan

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.357in. and 0.373in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.122in. and 0.133in. ⁓9/64"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

cross recess type 1

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.190in. (UTS #10)

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

36.0 rockwell c and 40.0 rockwell c

Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.

steel comp 4140 or steel comp 4340 or steel comp 8740

Screw Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.

MIL-S-5626 mil spec 1st material response or MIL-S-5000 mil spec 2nd material response or MIL-S-6049 mil spec 3rd material response

Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate

Screw Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.

QQ-P-416 ty 2 cl 3 fed spec all treatment responses

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS603 professional/industrial association standard

Answers.

What quantity is this sold in?

1HD

What class is the thread series?

Unjf

What type of screw surface treatment?

Cadmium and chromate

What is the thread quantity per inch?

32

What is the head style?

Pan

What is the thread length?

0.470 inches minimum and 0.562 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS8003-9?

5305-00-813-2791

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS8003-9?

FSC 5305 ⁓ Screws

NSN 5305-00-813-2791 SCREW,MACHINE

unjf thread series cadmium screw surface treated 32 thread quantity per inch pan head style 0.470" thread length right-hand 3a thread class

NIIN
008132791
NIIN Date
01/01/62
Schedule B
7318152000 
Name Code
06657
FIIG
A500D0
Item Weight
0.600lbs
Item Dimensions
--
QUP
Historical Price
$18.40 HD
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. NAS603-9P Cage 80205
2. 495892 Cage 77445
3. 495892 Cage 06680
4. NAS603-9 Cage 80205
5. 10125514 Cage A486G
6. 5305008132791 Cage SCY13

Major End Users Countries and entities

  • - National Aeronautics And Space Administration 
  • - Department of The Navy 
  • - Department of The Army 
  • - Department of The Air Force 
  • - U.s. Marine Corps 
  • - U.s. Coast Guard 
  • - Austria 
  • - Finland 
  • - Slovenia 
  • - Poland 
  • - Czech Republic 
  • - Brazil 
  • - Spain 
  • - Singapore 
  • - Morocco 
  • - Malaysia 
  • - Australia 
  • - Belgium 
  • - Canada 
  • - New Zealand 
  • - France 
  • - Germany 
  • - Republic of Korea 
  • - United Kingdom 
  • - Philippines 
  • - Netherlands 
  • - Portugal 
  • - Italy 
  • - Denmark 
  • - Norway 
  • - Greece 
  • - Turkey 
  • - Nato Maintenance And Supply Agency 

Major End Items End use applications

  • - Close in weapon system (ciws-phalanx)
  • - Support equipment, b-52 aircraft
  • - Support equipment, b-1 aircraft
  • - Aircraft, sof ( ac-130h, mc-130h, ec-130e, hc-130)
  • - Engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p)
  • - Engine, aircraft tf33-p-3/5/9 (c/ec-135, b-52h)
  • - Missile, all-weather anti-ship, harpoon (agm-84)
  • - Engine, aircraft, tf-33-p-7 (c-141a/b)
  • - Helicopter, mh-53e
  • - Ah 64 airframe (rotary wing aircraft)
  • - Helicopter,attack
  • - Power supply
  • - Box assembly,relay
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Test set,electrical power
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Panel,power distribution
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Support,structural component,aircraft
  • - Support,structural component,aircraft
  • - Panel,power distribution
  • - Helicopter,attack
  • - Helicopter,attack
  • - Test set,guided missile system test equipment
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Frame section,seat,aircraft
  • - Helicopter,attack
  • - Helicopter,attack
  • - Rectifier assembly,
  • - Strut,aircraft
  • - Helicopter,attack
  • - Relay drawer assemb
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Floor,aircraft
  • - Power supply
  • - Monitor assembly,gu
  • - Manifold,fluid,aircraft
  • - Manifold,fluid,aircraft
  • - Panel assembly,nozz
  • - Ordnance assembly,d
  • - Test load,signal as
  • - Drum assembly,ammunition
  • - Control panel,test
  • - Control panel,test
  • - Test set,navigation
  • - Load and relay pane
  • - Interconnecting box
  • - Helicopter,cargo-transport
  • - Helicopter,cargo-transport
  • - Armrest assembly,ai
  • - Armrest,aircraft
  • - Tip,aircraft
  • - Filter assembly,electrical
  • - Tail cone tip,aircr
  • - Tail cone assy,airc
  • - Simulator,breakout
  • - Simulator,fuzing,re
  • - Adapter,test
  • - Plate,identification
  • - Truck,lift,fork
  • - Loader assembly,ammunition
  • - Parts kit,fuel tank
  • - Analyzer,digital data,electronic test
  • - Adapter,test
  • - Test set,antenna system
  • - Panel assembly,airc
  • - Power control assembly,electrical,aircraft
  • - Drum assembly,ammunition
  • - Power control assembly,electrical,aircraft
  • - Power supply subassembly
  • - Intercommunication station
  • - Interconnecting box
  • - Adapter,test
  • - Panel,test,electrical
  • - Patchboard,electrical
  • - Test set,guided missile system test equipment
  • - Panel,patching,programming
  • - Adapter,test
  • - Converter,wave form
  • - Rack assembly,radio
  • - Cable assembly,special purpose,electrical,branched
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Seat,aircraft ejection
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Helicopter,attack
  • - Adapter,ground handling equipment
  • - Panel,control,electrical-electronic equipment
  • - Filter assembly,electrical
  • - Pylon,aircraft
  • - Pylon,aircraft
  • - Plate,structural,aircraft
  • - Door,access,aircraft
  • - Circuit card assembly
  • - Testing machine,electromechanical actuator
  • - Box,resistor
  • - Control,countermeasures transmitting set
  • - Pylon,aircraft
  • - Adapter,test
  • - Panel,indicating,light transmitting
  • - Mounting base,electrical equipment
  • - Panel,structural,aircraft
  • - Distribution box
  • - Test set,electrical power
  • - Test set,electrical power
  • - Regulator,voltage
  • - Seat,aircraft ejection
  • - Seat,aircraft ejection
  • - Electronic components assembly
  • - Strut,aircraft
  • - Strut,aircraft
  • - Strut,aircraft
  • - Housing,dipole
  • - Adapter kit,test
  • - Interconnecting box
  • - Ohmmeter
  • - Cowling
  • - Panel,power distribution
  • - Test set,electrical power
  • - Adapter kit,test
  • - Power supply subassembly
  • - Power supply subassembly
  • - Rack,bomb ejector,aircraft
  • - Interconnect juncti
  • - Maintenance platform,guided missile
  • - Leak detector,engin
  • - Test set,bench
  • - Pylon,aircraft
  • - Pylon,aircraft
  • - Test set,g and c co
  • - Distribution box
  • - Door,access,aircraft
  • - Test set,liquid coo
  • - Test equipment,guided missile system
  • - Test set,guided missile
  • - Control box,electrical,armament system
  • - Uhf filter assy
  • - Uhf filter assy
  • - Test set,power supply
  • - Monitor,guidance co
  • - Power supply subassembly
  • - Seat,aircraft ejection
  • - Seat,aircraft ejection
  • - Fan,tubeaxial
  • - Indicator,liquid quantity
  • - Test set,antenna
  • - Display unit,head-up
  • - Door,access,aircraft

Availability for NAS8003-9 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

NAS8003-9 / Screw,machineWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.