NAS5312E4-20

NAS5312E420 Machine Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS5312E4-20 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

1.144in. ⁓1-5/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.250in. ⁓1-1/4"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat countersunk

Spline Major Diameter
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.

0.220in. and 0.223in.

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

torx

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

MV-22 aircraft

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.250in. ⁓1/4"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

5820 pounds per square inch

Countersink Angle
The included angle of the countersink.

100.0 degrees

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

feat

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

screw, 100 degree flush head, full thread, 6 lobe recess

Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.

iron alloy 660

Screw Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.

AMS5731 assn std single material response or AMS5732 assn std single material response or AMS5737 assn std single material response or AMS5835 assn std single material response

Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Screw Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.

AMS2700Method 1, TYPE2 assn std single treatment response or AMS2700 method 1, type 8, cls 1 assn std single treatment response

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

essential to weapon system performance or operation, or the preservation of life or safety of operating personnel

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What type of screw surface treatment?

Passivate

What is the thread quantity per inch?

28

What is the head style?

Flat countersunk

What is the thread length?

1.144 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS5312E4-20?

5305-01-529-3696

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 011790
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS5312E4-20?

FSC 5305 ⁓ Screws

NSN 5305-01-529-3696 SCREW,MACHINE

Used on mv-22 aircraft. unjf thread series essential to weapon system performance or operation, or the preservation of life or safety of operating personnel passivate screw surface treated screw, 100 degree flush head, full thread, 6 lobe recess 28 thread quantity per inch flat countersunk head style 1.144" thread length right-hand 3a thread class

NIIN
015293696
NIIN Date
04/14/05
Schedule B
7318152000 
Name Code
06657
FIIG
A500D0
Item Weight
0.000lbs
Item Dimensions
QUP
Historical Price
$56.20 EA
DEMIL / ITAR
USML/ITAR controlled item (Code: B)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 7AS5312E4-20 Cage 1EM77
2. 120-264E4-20 Cage 97499

Major End Users Countries and entities

  • - Department of The Navy 
  • - Department of The Air Force 

Availability for NAS5312E4-20 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft 
Commodity (for shipments via water)
Aircraft parts, to include test/tool sets and equipment (other than armament systems) 
NMFC (national motor freight code)
011790 AIRCRAFT PARTS NOI 
UFC (universal freight code)
04720 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

NAS5312E4-20 / Screw,machineWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.