Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS35206-219440X 3 specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.700in. and 0.750in. ⁓3/4"
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.750in. ⁓3/4"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
pan
Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.205in. and 0.219in.
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.070in. and 0.080in. ⁓3/32"
Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.112in. (UTS #4)
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40
Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
60000 pounds per square inch
Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.
The chemical compound or mechanical mixture properties of which the screw is fabricated.
steel comp 1010 or steel comp 1011 or steel comp 1013
Screw Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.
66 fed std all material responses
Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
When was the most recent contract awarded?
On 11/16/2007 under contract SPM5A708V0161 for qty 204
What quantity is this sold in?
1HD
What class is the thread series?
Unc
What type of screw surface treatment?
Cadmium
What is the thread quantity per inch?
40
What is the head style?
Pan
What is the thread length?
0.700 inches minimum and 0.750 inches maximum
What is the thread direction?
Right-hand
What is the thread class?
2a
How is this classified for shipping?
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
What's the federal classification of MS35206-219440X 3?
FSC 5305 ⁓ Screws
NSN 5305-00-984-4976 SCREW,MACHINE
unc thread series cadmium screw surface treated 40 thread quantity per inch pan head style 0.700" thread length right-hand 2a thread class
- NIIN
- 009844976
- NIIN Date
- 01/01/62
- Schedule B
- 7318152000
- Name Code
- 06657
- FIIG
- A500D0
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $7.68 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS35225-19 | Cage D9182 |
| 2. | 40-59-4-12 | Cage 04236 |
| 3. | SPE315A12 | Cage K0378 |
| 4. | 6001269 | Cage 80195 |
| 5. | 935.63.11.028 | Cage S4080 |
| 6. | 415 509 | Cage 77294 |
| 7. | 740299-135 | Cage 07187 |
| 8. | MS35206-219 | Cage 80205 |
| 9. | 19028 | Cage 73734 |
| 10. | 926C171P219 | Cage 89954 |
| 11. | 19028ADX | Cage 1VN02 |
| 12. | MS35208-18 | Cage 96906 |
| 13. | AN515-4-12 | Cage 88044 |
| 14. | MS35206-219 | Cage 96906 |
| 15. | 5305009844976 | Cage SCY13 |
| 16. | 415-02-613 | Cage 0ENJ2 |
| 17. | 10390321 | Cage A486G |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
- - National Aeronautics And Space Administration
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Bureau of Prisons
- - Bosnia And Herzegovina
- - Austria
- - Finland
- - Lithuania
- - Slovenia
- - Poland
- - Brazil
- - Spain
- - Singapore
- - Kuwait
- - Morocco
- - Egypt
- - Saudi Arabia
- - Malaysia
- - Australia
- - Belgium
- - Canada
- - New Zealand
- - France
- - Germany
- - Republic of Korea
- - United Kingdom
- - Netherlands
- - Portugal
- - Italy
- - Denmark
- - Norway
- - Greece
- - Turkey
- - Nato Maintenance And Supply Agency
Major End Items End use applications
- - Central, communications, tam a32357
- - Air conditioner, f18-mpi
- - Excavator, combat, m9 ace
- - Direct air support central, an/uyq-3a (v) 2
- - Central office, telephone auto
- - Generator set, tact quiet, 10kw, 400hz, mep-813a
- - Fuel pump module (sixcon) (tam) b1580
- - Telephone set, tam a26357
- - Light armored vehicle, air defense, lav-ad
- - System control group, technical (dtc) facility, an/tsq-227
- - Power plant,electric,trailer mounted
- - Sight,optical displ
- - Power supply
- - Light,navigational,aircraft
- - Optical sight unit
- - Tuner,radio frequency
- - Adapter kit,test
- - Control,computer
- - Control,antenna coupler
- - Control box,electrical/electronic,aircraft air temperature
- - Power supply
- - Truck,utility
- - Display unit,head-up
- - Amplifier,electronic control
- - Truck,utility
- - Ballast,aircraft
- - Electronic components assembly
- - Circuit card assembly
- - Power supply
- - Synchronizer,system
- - Countermeasure set,subassembly
- - Truck,utility
- - Rack,automatic pilot controls
- - Truck,utility
- - Synchronizer,electrical
- - Truck,ambulance
- - Board assembly,airc
- - Truck,ambulance
- - Power supply
- - Control module,prot
- - Control box,electrical/electronic,aircraft air temperature
- - Truck,utility
- - Display unit,head-up
- - Amplifier,lead comp
- - Truck,ambulance
- - Control,generator
- - Maintenance kit,aircraft
- - Test set subassembly,aircraft components
- - Module,pin modulato
- - Radar,surveillance
- - Truck,ambulance
- - Satellite communica
- - Generator set,diesel engine
- - Truck,utility
- - Wiring plane assemb
- - Filter unit,gas-particulate
- - Air conditioner
- - Control unit,antiskid
- - Controller,air pressure,aircraft cabin
- - Control unit,alarm
- - Generator set,diesel engine
- - Air conditioner
- - Entrance,protective,pressurized
- - Power supply
- - Maintenance fixture,weapon
- - Regulator,air pressure,aircraft cabin
- - Indicator,distortion
- - Generator set,diesel engine
- - Power supply subassembly
- - Air conditioner
- - Circuit card assembly
- - Installation kit,cbr protection equipment
- - Entrance,protective,pressurized
- - Relay,electromagnetic
- - Printer,projection,photographic
- - Power supply
- - Data processing sys
- - Power supply
- - Processor,radar data
- - Circuit card assembly
- - Air conditioner
- - Linkage assembly
- - Computer,navigational
- - Electrical synchronizer subassembly
- - Filter,radio frequency interference
- - Power supply
- - Indicator,azimuth-range
- - Air conditioner
- - Truck,ambulance
- - Power supply
- - Power supply
- - Truck,utility
- - Printed circuit board
- - Truck,utility
- - Test set,environmental control system,aircraft
- - Air conditioner
- - Control unit,antiskid
- - Air conditioner
- - Power supply
- - Truck,utility
- - Cable assembly,special purpose,electrical
- - Truck,ambulance
- - Semitrailer,tank transporter
- - Cable assembly,special purpose,electrical,branched
- - Repeater,telephone
- - Electronic components assembly
- - Circuit card assembly
- - Power supply
- - Power plant,electric,trailer mounted
- - Test set,electrical power
- - Test set,transponder set
- - Power supply
- - Air conditioner
- - Electronic components assembly
- - Power supply
- - Power supply
- - Test set,radio
- - Amplifier,electronic control
- - Generator,sweep
- - Control,telephone line
- - Air conditioner
- - Amplifier,electronic control
- - Test set,intervalometer
- - Test stand,circuit
- - Generator,signal
- - Test set,automatic pilot
- - Computer,bomb tossi
- - Truck,utility
- - Carrier,air-antitank defense missile system
- - Panel,protection,electrical system
- - Regulator,voltage
- - Power supply
- - Air conditioner
- - Test station,guided missile system
- - Air conditioner
- - Calibrator,voltage
- - Panel,protection,electrical system
- - Circuit card assemb
- - Test set,synchropha
- - Regulator assy,prop
- - Computer subassembly
- - Control,generator
- - Power supply
- - Control panel,aircraft
- - Control box,electrical/electronic,aircraft air temperature
- - Truck,utility
- - Truck,utility
- - Circuit card assembly
- - Generator,signal
- - Transmitter,pressure
- - Sensor,stick force
- - Amplifier,optical s
- - Test set,control
- - Central,communicati
- - Cavity assembly,tun
- - Valve,float,aircraft fuel tank
- - Motor-generator
- - Actuator,electro-mechanical,linear
- - Electronic components assembly
- - Electronic components assembly
- - Truck,utility
- - Meter,electrical frequency
- - Chassis assembly
- - Test set,radio frequency power
- - Data processing sys
- - Truck,aircraft cargo loading-unloading
- - Test stand,electric and hydraulic system components
- - Data processing sys
- - Test set,electronic circuit plug-in unit
- - Truck,utility
- - Power supply
- - Indicator,azimuth-range
- - Indicator,azimuth-range
- - Air conditioner
- - Light assembly,indicator
- - Test facilities kit
- - Test set subassembly,electrical and electronic test equipment
- - Indicator simulated
- - Test set,electronic circuit plug-in unit
- - Circuit card assembly
- - Control panel,aircraft
- - Printed wiring board
- - Display unit,head-up
- - Circuit card assembly
- - Control,generator
- - Chassis,electrical-electronic equipment
- - Rectifier assembly,
- - Generator set,gas turbine engine
- - Cavity,tuned
- - Module,electornic,a
- - Control,generator
- - Motor-generator
- - Adapter kit,test
- - Landing control central
- - Connector,plug,electrical
- - Surveying instrument,azimuth
- - Air conditioner
- - Receiver-transmitter,radio
- - Circuit card assembly
- - Air conditioner
- - Circuit card assembly
- - Circuit card assembly
- - Radar set subassembly
- - Indicator,azimuth-range
- - Helicopter,cargo-transport
- - Counter,electronic,digital readout
- - Processor,radar data
- - Truck,utility
- - Helicopter,cargo-transport
- - Truck,utility
- - Air conditioner
- - Air conditioner
- - Air conditioner
- - Truck,utility
- - Truck,utility
- - Air conditioner
- - Generator,signal
- - Receiver,radio
- - Control,voltage regulator
- - Truck,utility
- - Truck,ambulance
- - Gyro,lead computer,
- - Valve,float,aircraft fuel tank
- - Generator set,diesel engine
- - Truck,utility
- - Circuit card assembly
- - Antenna
- - Light,landing,aircraft
- - Amplifier,electronic control
- - Communication system control group
- - Electronic components assembly
- - Air conditioner
- - Data processing sys
- - Terminal,communicat
- - Synchronizer,electrical
- - Test stand,aircraft generator
- - Test set,electronic systems
- - Truck,utility
- - Printer,contact,photographic
- - Linkage assembly
- - Circuit card assembly
- - Telephone set
- - Air conditioner
- - Control,radar set
- - Air conditioner
- - Transmitter,pressure
- - Power plant,electric
- - Control box,electrical/electronic,aircraft air temperature
- - Indicator,thrust,engine testing
- - Control box,electrical/electronic,aircraft air temperature
- - Air conditioner
- - Telephone set
- - Generator set,gas turbine engine
- - Indicator,azimuth-range
- - Truck,utility
- - Adapter,test
- - Test set,synchropha
- - Test station,guided missile
- - Panel,protection,electrical system
- - Regulator,voltage
- - Test set,roll contr
- - Blanking assy,jtids
- - Installation kit,cbr protection equipment
- - Amplifier,electronic control
- - Air conditioner
- - Multiplexer-demulti
- - Air conditioner
- - Air conditioner
- - Test set,bench
- - Truck,utility
- - X-ray apparatus,radiographic,industrial
- - Air conditioner
- - Truck,utility
- - Regulator,voltage
- - Air conditioner
- - Radio set group
- - Carrier,personnel,full tracked
- - Generator set,diesel engine
- - Test set,transponder set
- - Truck,utility
- - Air conditioner
- - Modem-processor,dig
- - Test set,slate con
- - Sight,optical displ
- - Radar set subassembly
- - Test set,thermostatic switch
- - Test set,electronic circuit plug-in unit
Availability for MS35206-219440X 3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
MS35206-219440X 3 / Screw,machineWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
