FTD7195T1222-18

FTD7195T122218 Machine Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. FTD7195T1222-18 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.392in. ⁓13/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.145in. ⁓1-5/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.247in. ⁓1/4"

Width Between Flats

0.371in.

Spline Major Diameter
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.

0.221in.

Locking Feature
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.

retainer

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

torx

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

f/A-22 raptor

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.250in. ⁓1/4"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

4625 pounds per square inch

Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.

steel corrosion resisting

Screw Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.

AMS5731 assn std single material response or AMS5737 assn std single material response

Bearing Surface Of Head Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the bearing surface of head is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Head Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the head is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Shank Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the shank is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Bearing Surface Of Head Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the bearing surface of head.

QQ-P-35 fed spec single treatment response

Head Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the head.

QQ-P-35 fed spec single treatment response

Screw Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.

QQ-P-35 fed spec single treatment response

Shank Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type class,grade,and the like,that identifies the surface treatment material of the shank.

QQ-P-35 fed spec single treatment response

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

retainer ring slot each side

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What type of screw surface treatment?

Passivate

What is the thread quantity per inch?

28

What is the head style?

Hexagon

What is the thread length?

0.392 inches

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for FTD7195T1222-18?

5305-01-529-7012

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of FTD7195T1222-18?

FSC 5305 ⁓ Screws

NSN 5305-01-529-7012 SCREW,MACHINE

Used on f/a-22 raptor. unjf thread series retainer ring slot each side passivate screw surface treated 28 thread quantity per inch hexagon head style 0.392" thread length right-hand 3a thread class

NIIN
015297012
NIIN Date
04/27/05
Schedule B
7318152000 
Name Code
06657
FIIG
A500D0
QUP
Historical Price
$34.33 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for FTD7195T1222-18 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

FTD7195T1222-18 / Screw,machineWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.