AN501A416-32

AN501A41632 Machine Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. AN501A416-32 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

2.000in. ⁓2-1/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

2.000in. ⁓2-1/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

fillister

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.389in. and 0.414in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.219in. and 0.237in. ⁓1/4"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

slot

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

helicopter spare parts

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.250in. ⁓1/4"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

60000 pounds per square inch

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

screw, machine, fillister head, fine thread

Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.

steel comp 1010

Screw Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.

QQ-S-637, TYFS1010 fed spec single material response

Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Screw Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.

QQ-P-416, TY1, CL3 fed spec single treatment response

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

drilled hole to be on center approx at right anglesto the slot but must not break thru the base or top; screws shall be free of all loose or hanging burrs or slivers which might become dislodged under usage

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS1103 professional/industrial association standard

Answers.

What class is the thread series?

Unf

What type of screw surface treatment?

Cadmium

What is the thread quantity per inch?

28

What is the head style?

Fillister

What is the thread length?

2.000 inches

What is the thread direction?

Right-hand

What is the thread class?

2a

What is the NSN for AN501A416-32?

5305-01-470-0655

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of AN501A416-32?

FSC 5305 ⁓ Screws

NSN 5305-01-470-0655 SCREW,MACHINE

Used on helicopter spare parts. unf thread series drilled hole to be on center approx at right anglesto the slot but must not break thru the base or top; screws shall be free of all loose or hanging burrs or slivers which might become dislodged under usage cadmium screw surface treated screw, machine, fillister head, fine thread 28 thread quantity per inch fillister head style 2.000" thread length right-hand 2a thread class

NIIN
014700655
NIIN Date
12/06/99
Schedule B
7318152000 
Name Code
06657
FIIG
A500D0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Italy 

Availability for AN501A416-32 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

AN501A416-32 / Screw,machineWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.