Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AN500-6-6 specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.313in. and 0.375in. ⁓3/8"
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.375in. ⁓3/8"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
fillister
Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.208in. and 0.226in.
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.089in. and 0.096in. ⁓7/64"
Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.046in. ⁓3/64"
Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.138in. (UTS #6)
Hole Quantity
The number of holes provided.
The number of holes provided.
1
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
55000 pounds per square inch
Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.
The chemical compound or mechanical mixture properties of which the screw is fabricated.
steel
Screw Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.
QQ-S-633 fed spec single material response
Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium and chromate
Screw Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.
QQ-P-416, type 2, class 3 fed spec single treatment response
Head Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration in the head.
The style designation that most nearly corresponds to the appearance of the hole configuration in the head.
round
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
What quantity is this sold in?
1HD
What class is the thread series?
Unc
What type of screw surface treatment?
Cadmium and chromate
What is the thread quantity per inch?
32
What is the inside hole diameter?
0.046 inches
What is the head style?
Fillister
What is the thread length?
0.313 inches minimum and 0.375 inches maximum
What is the thread direction?
Right-hand
What is the thread class?
2a
How is this classified for shipping?
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
What's the federal classification of AN500-6-6?
FSC 5305 ⁓ Screws
NSN 5305-00-582-5807 SCREW,MACHINE
unc thread series cadmium screw surface treated 32 thread quantity per inch 0.046" hole diameter fillister head style 0.313" thread length right-hand 2a thread class
- NIIN
- 005825807
- NIIN Date
- 01/01/63
- Schedule B
- 7318152000
- Name Code
- 06657
- FIIG
- A500D0
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $50.68 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS35265-28 | Cage 96906 |
| 2. | 7268227 | Cage 19204 |
| 3. | 90004-3 | Cage 59875 |
| 4. | AN500A6-6 | Cage 88044 |
| 5. | 83-16604-01 | Cage 01276 |
| 6. | 125-19962-12 | Cage D9182 |
| 7. | 0740776 | Cage S3002 |
| 8. | A10662 | Cage U4574 |
| 9. | 83-16604-01 | Cage 24785 |
| 10. | 83-16604-01 | Cage 69705 |
| 11. | AN500A6-6 | Cage 59875 |
| 12. | 5305005825807 | Cage SCY13 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Austria
- - Poland
- - Bulgaria
- - Slovakia
- - Brazil
- - Spain
- - Singapore
- - Kuwait
- - Morocco
- - Malaysia
- - Thailand
- - Australia
- - Belgium
- - Canada
- - New Zealand
- - France
- - Germany
- - Republic of Korea
- - United Kingdom
- - Netherlands
- - Portugal
- - Italy
- - Denmark
- - Norway
- - Greece
- - Turkey
Major End Items End use applications
- - Torpedo, mk 48
- - Aircraft, sof ( ac-130h, mc-130h, ec-130e, hc-130)
- - Trainer, b-1b aircraft
- - Engine, aircraft, t56-a-7/15 (c-130b/e/h/n/p)
- - Torpedo systems, mk 50
- - Aircraft, c-2a (reprocured)
- - Engine, aircraft, tf-33-p-7 (c-141a/b)
- - Radar set, lightweight 3d (an/tps-59)
- - Armored security vehicle, model xm1117
- - Winch,aircraft mounted
- - Radio set group
- - Turbine,aircraft cooling
- - Test set,radar
- - Actuator,electro-mechanical,rotary
- - Actuator,electro-mechanical,rotary
- - Actuator,electro-mechanical,linear
- - Actuator,electro-mechanical,linear
- - Switch assembly,mul
- - Actuator,mechanical,aircraft
- - Helicopter,attack
- - Cylinder assembly,reaction
- - Gyroscope,rate
- - Power plant,electric,trailer mounted
- - Motor,direct current
- - Valve,linear,directional control
- - Pump,submerged,aircraft
- - Valve,check
- - Actuator,electro-mechanical,rotary
- - Actuator,electro-mechanical,rotary
- - Radio set group
- - Valve assembly,environmental control,aircraft
- - Test set,computer
- - Motor,alternating current
- - Ignition assembly
- - Compressor unit,reciprocating
- - Valve,float,aircraft fuel tank
- - Valve,float,aircraft fuel tank
- - Fan,vaneaxial
- - Transmitter,rate of flow
- - Switch assembly,cen
- - Cylinder assembly,reaction
- - Valve assembly,environmental control,aircraft
- - Gearcase-motor
- - Regulator,voltage
- - Gearbox assembly,aircraft
- - Transmitter,rate of flow
- - Regulator,air pressure,aircraft cabin
- - Test set,transponder set
- - Step assembly,lower
- - Actuator,electro-mechanical,linear
- - Valve assembly
- - Radiac set
- - Motor-generator
- - Helicopter,cargo-transport
- - Transmitter,pressure
- - Actuator,electro-mechanical,linear
- - Actuator,electro-mechanical,rotary
- - Actuator,electro-mechanical,rotary
- - Valve assy,air modu
- - Servocylinder
- - Hydraulic servo ass
- - Control unit,antiskid
- - Control,generator
- - Switch assy,centrif
- - Motor,alternating current
- - Actuator,electro-mechanical,linear
- - Accumulator,hydraulic
- - Gyroscope,rate
- - Actuator,electro-mechanical,rotary
- - Actuator,electro-mechanical,linear
- - Valve assembly,temp
- - Motor,alternating current
- - Actuator,electro-mechanical,linear
- - Actuator,electro-mechanical,linear
- - Pump,submerged,aircraft
- - Compressor unit,reciprocating
- - Igniter,spark,aircraft heater
- - Actuator,electro-mechanical,linear
- - Motor-generator
- - Actuator,electro-mechanical,rotary
- - Regulator,voltage
- - Generator,direct current
- - Actuator,electro-mechanical,rotary
- - Valve,butterfly
- - Valve assembly,manifold
- - Actuator,electro-mechanical,rotary
- - Generator,alternating current
- - Generator set,diesel engine
- - Accumulator,hydraulic
- - Actuator,electro-mechanical,rotary
- - Generator set,diesel engine
- - Actuator,electro-mechanical,linear
- - Actuator,electro-mechanical,rotary
- - Scale,aircraft weighing
- - Motor-generator
- - Motor,alternating current
- - Carrier,ammunition,tracked
- - Actuator,electro-mechanical,linear
- - Recorder-reproducer,sound
- - Accelerometer,electrical,linear
- - Helicopter,attack
- - Gyroscope,rate
- - Generator set,diesel engine
- - Helicopter,attack
- - Truck,tank
- - Carrier,ammunition,tracked
- - Motor-generator
- - Motor,direct current
- - Sight,lead computing,automatic
- - Motor-generator
- - Helicopter,observation
- - Control,antenna
- - Pump,centrifugal
- - Antenna,radar set
- - Generator set,diesel engine
- - Motor,alternating current
- - Generator set,diesel engine
- - Actuator,electro-mechanical,linear
- - Accelerometer assembly,electrical
- - Igniter,spark,aircraft heater
- - Accumulator,hydraulic
- - Regulator,air pressure,aircraft cabin
- - Actuator,electro-mechanical,rotary
- - Actuator,electro-mechanical,rotary
- - Accumulator,hydraulic
- - Valve,pressure,anti-g suit
- - Transmitter,rate of flow and consumption
- - Control panel,detai
- - Motor,direct current
- - Engine,gas turbine
- - Generator set,gas t
- - Radiac set
- - Accelerometer,electrical,linear
- - Compressor unit,reciprocating
- - Switch,centrifugal
- - Control,antenna
- - Valve,temperature d
- - Pump,submerged,aircraft
- - Actuator,electro-mechanical,linear
- - Generator set,diesel engine
- - Generator set,diesel engine
- - Generator set,diesel engine
- - Generator set,diesel engine
- - Generator set,diesel engine
- - Turbine,aircraft cooling
- - Generator set,diesel engine
- - Distribution box
- - Tank,fuel,aircraft
- - Actuator,electro-mechanical,linear
- - Tank,fuel,aircraft
- - Regulator,air pressure,aircraft cabin
- - Regulator,oxygen,barometric continuous flow
- - Generator set,diesel engine
- - Cylinder assembly,reaction
- - Spring assembly,ove
- - Antenna
- - Generator,alternating current
- - Generator set,diesel engine
- - Generator set,diesel engine
- - Generator set,diesel engine
- - Valve,regulating,fluid pressure
- - Adapter kit,test
- - Actuator,electro-mechanical,linear
- - Helicopter,observation
- - Winch,aircraft mounted
- - Combat engineer vehicle,full tracked
- - Generator set,gas turbine engine
- - Gearbox assembly,aircraft
- - Indicator,azimuth-elevation-range
- - Cylinder assembly,reaction
- - Test set,armature
- - Regulator,air pressure,aircraft cabin
- - Ignition assembly a
- - Stator,motor
- - Motor-generator
- - Helicopter,cargo-transport
- - Receiver-transmitter,radio
- - Helicopter,attack
- - Pump,fuel,metering and distributing
- - Truck,tank
- - Generator set,diesel engine
- - Control,antenna
- - Helicopter,cargo-transport
- - Actuator,electro-mechanical,rotary
- - Generator set,diesel engine
- - Carrier,ammunition,tracked
- - Bakery plant,trailer mounted
- - Generator set,diesel engine
- - Truck,fire fighting
- - Starter,engine,electrical
- - Regulator,air pressure,aircraft cabin
- - Generator set,diesel engine
- - Helicopter,cargo-transport
- - Actuator,electro-mechanical,rotary
- - Skyanchor assy,retr
- - Generator set,diesel engine
- - Helicopter,cargo-transport
- - Control,antenna
- - Motor,direct current
- - Antenna assembly
- - Indicator,azimuth-elevation-range
- - Actuator,electro-mechanical,rotary
- - Balancing assembly
- - Cylinder assembly,reaction
- - Actuator,electro-mechanical,linear
- - Indicator,azimuth-elevation-range
- - Helicopter,cargo-transport
- - Control,antenna
- - Transmitter,rate of flow
- - Pressurizing set,electronic equipment
- - Transmitter assy,te
- - Generator set,diesel engine
- - Motor,alternating current
- - Antenna
- - Indicator,subassemb
- - Auxiliary power sup
- - Gyroscope,rate
- - Actuator,electro-mechanical,linear
- - Panel,control,electrical-electronic equipment
- - Lever,control
- - Actuator,mechanical,aircraft
- - Generator,alternating current
Availability for AN500-6-6 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
AN500-6-6 / Screw,machineWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
