Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 92010A238 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
27.8 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
30.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
7.5 mm
A measurement from the bottom to the top of the head,in distinction from depth.
2.2 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type ii
The national stock number or the identification information of the end equipment for which the item is a part.
5865-01-585-3857
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
4.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
0.7
The included angle of the countersink.
90.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
flat head phillips machine screw
The chemical compound or mechanical mixture properties of which the screw is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.
18-8 stainless steel mfr ref single material response
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
drive style is no.2 phillips style
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
The document designator of the specification or standard which established the item of supply.
D8286-Din 965 professional/industrial association standard
Answers.
M
Flat countersunk
27.8 millimeters
Right-hand
Schedule B number: 7318152000
nmfc 133300
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-612-7194 SCREW,MACHINE
Used on 5865-01-585-3857. m thread series drive style is no.2 phillips style flat head phillips machine screw flat countersunk head style 27.8mm thread length right-hand
- NIIN
- 016127194
- NIIN Date
- 10/18/12
- Schedule B
- 7318152000
- Name Code
- 06657
- FIIG
- A500D0
- QUP
- Historical Price
- $0.43 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 92010A238 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Engineer and material handling equipment, test/tool sets and equipment
- NMFC (national motor freight code)
- 133300 MACHINERY/MACHINES NOI
- UFC (universal freight code)
- 63220
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
92010A238 / Screw,machineWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
