90274A326

90274A326 Machine Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 90274A326 specification

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

13.5 mm

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

16.0 mm

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat countersunk

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

9.2 mm

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

slot

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

end item nsn: 2420-01-560-2306; interim vehicle mounted mine detection (ivmmd) mkiii system, husky

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

5.0 mm

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

58000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

71.0 rockwell b

Thread Pitch In Millimeters
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.

0.8

External Thread Tolerance Class
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.

6h

Countersink Angle
The included angle of the countersink.

90.0 degrees

Screw Material
The chemical compound or mechanical mixture properties of which the screw is fabricated.

steel

Bearing Surface Of Head Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the bearing surface of head is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

zinc

Head Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the head is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

zinc

Screw Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

zinc

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

m

Answers.

What quantity is this sold in?

1HD

What class is the thread series?

M

What type of screw surface treatment?

Zinc

What is the head style?

Flat countersunk

What is the thread length?

13.5 millimeters

What is the thread direction?

Right-hand

What is the NSN for 90274A326?

5305-01-568-2079

How is this classified for shipping?

Schedule B number: 8710000090
nmfc 133300
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons

What's the federal classification of 90274A326?

FSC 5305 ⁓ Screws

NSN 5305-01-568-2079 SCREW,MACHINE

Used on end item nsn: 2420-01-560-2306; interim vehicle mounted mine detection (ivmmd) mkiii system, husky. m thread series zinc screw surface treated flat countersunk head style 13.5mm thread length right-hand

NIIN
015682079
NIIN Date
10/23/08
Schedule B
8710000090 
Name Code
06657
FIIG
A500D0
Item Weight
0.000lbs
Item Dimensions
QUP
Historical Price
$33.65 HD
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Army 
  • - U.s. Marine Corps 
  • - Canada 

Availability for 90274A326 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Engineer and material handling equipment, test/tool sets and equipment 
NMFC (national motor freight code)
133300 MACHINERY/MACHINES NOI 
UFC (universal freight code)
63220 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

90274A326 / Screw,machineWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.