Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 609822-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.470in. and 0.600in. ⁓39/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.750in. ⁓3/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.430in. and 0.440in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.080in. and 0.085in. ⁓3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The chemical compound or mechanical mixture properties of which the screw is fabricated.
aluminum alloy 2024
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.
QQ-A-225/6, T4 fed spec single material response
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
4internally relieved body, 0.050-0.060 in dia hole thru, counterbored from head 0.078-0.083 in dia to 0.650-0.680 in deep; head counterbored 0.350-0.360 in dia to 0.030-0.040 in deep; end opposite head countersunk 85.0-95.0 deg by 0.110-0.090 in dia
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
32
Flat chamfer
0.470 inches minimum and 0.600 inches maximum
Right-hand
2a
Schedule B number: 7616106000
Threaded fasteners of aluminum
FSC 5305 ⁓ Screws
NSN 5305-00-839-3079 SCREW,MACHINE
unf thread series 4internally relieved body, 0.050-0.060 in dia hole thru, counterbored from head 0.078-0.083 in dia to 0.650-0.680 in deep; head counterbored 0.350-0.360 in dia to 0.030-0.040 in deep; end opposite head countersunk 85.0-95.0 deg by 0.110-0.090 in dia 32 thread quantity per inch flat chamfer head style 0.470" thread length right-hand 2a thread class
- NIIN
- 008393079
- NIIN Date
- 12/14/66
- Schedule B
- 7616106000
- Name Code
- 06657
- FIIG
- A500D0
- QUP
- 1
- Historical Price
- $21.78 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Greece
Availability for 609822-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
609822-1 / Screw,machineWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
