Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 418736-12 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.089in. and 0.125in. ⁓1/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.094in. and 0.125in. ⁓1/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.156in. and 0.172in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.086in. (UTS #2)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
56
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
80000 pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the screw is fabricated.
steel comp 302 or steel comp 303 or steel comp 321 or steel comp 321
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1HD
Unc
Passivate
56
Flat countersunk
0.089 inches minimum and 0.125 inches maximum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-00-964-7369 SCREW,MACHINE
unc thread series passivate screw surface treated 56 thread quantity per inch flat countersunk head style 0.089" thread length right-hand 2a thread class
- NIIN
- 009647369
- NIIN Date
- 01/01/62
- Schedule B
- 7318152000
- Name Code
- 06657
- FIIG
- A500D0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $8.00 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 2504188-58 | Cage 07187 |
| 2. | 722-016-005 | Cage 26055 |
| 3. | NAS662C2R2 | Cage 80205 |
| 4. | B72814 | Cage K0967 |
| 5. | 947575-1201 | Cage 06481 |
| 6. | 947575-1202 | Cage 06481 |
| 7. | 100000-01-2-1 | Cage 19565 |
| 8. | 10114757 | Cage A486G |
| 9. | 2504188-58 | Cage 07187 |
| 10. | 722-016-005 | Cage 26055 |
| 11. | NAS662C2R2 | Cage 80205 |
| 12. | B72814 | Cage K0967 |
| 13. | 947575-1201 | Cage 06481 |
| 14. | 947575-1202 | Cage 06481 |
| 15. | 100000-01-2-1 | Cage 19565 |
| 16. | 10114757 | Cage A486G |
| 17. | 2504188-58 | Cage 07187 |
| 18. | 722-016-005 | Cage 26055 |
| 19. | NAS662C2R2 | Cage 80205 |
| 20. | B72814 | Cage K0967 |
| 21. | 947575-1201 | Cage 06481 |
| 22. | 947575-1202 | Cage 06481 |
| 23. | 100000-01-2-1 | Cage 19565 |
| 24. | 10114757 | Cage A486G |
| 25. | 2504188-58 | Cage 07187 |
| 26. | 722-016-005 | Cage 26055 |
| 27. | NAS662C2R2 | Cage 80205 |
| 28. | B72814 | Cage K0967 |
| 29. | 947575-1201 | Cage 06481 |
| 30. | 947575-1202 | Cage 06481 |
| 31. | 100000-01-2-1 | Cage 19565 |
| 32. | 10114757 | Cage A486G |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - Austria
- - Finland
- - Poland
- - Brazil
- - Spain
- - Singapore
- - Malaysia
- - Australia
- - Canada
- - New Zealand
- - France
- - Germany
- - Republic of Korea
- - United Kingdom
- - Italy
- - Denmark
- - Norway
- - Greece
- - Turkey
Availability for 418736-12 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
418736-12 / Screw,machineWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
