Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 16415010 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
9.1 mm and 10.0 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
10.00 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
binding
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
5.0 mm
A measurement from the bottom to the top of the head,in distinction from depth.
2.5 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
2.6 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
0.45
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.
6g
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
Answers.
1EA
M
Binding
9.1 millimeters minimum and 10.0 millimeters maximum
Right-hand
FSC 5305 ⁓ Screws
NSN 5305-01-234-8175 SCREW,MACHINE
m thread series binding head style 9.1mm thread length right-hand
- NIIN
- 012348175
- NIIN Date
- 06/20/86
- Schedule B
- Name Code
- 06657
- FIIG
- A500D0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $0.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 16412010 | Cage S0633 |
Major End Users Countries and entities
- - Department of The Navy
- - Spain
Availability for 16415010 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
16415010 / Screw,machineWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
