Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 0N241847-4 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.182in. ⁓3/16"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.562in. ⁓9/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
pan no. 2
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.256in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.087in. ⁓3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
The national stock number or the identification information of the end equipment for which the item is a part.
KY-57, 5810-00-434-3644
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.112in. (UTS #4)
Those features,not otherwise specified,which may be required for proper functioning of the item.
finished head
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
80000 pounds per square inch
The chemical compound or mechanical mixture properties of which the screw is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.
QQ-S-763 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.
MIL-F-13924, cl 3 mil spec single treatment response
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
98230-0N241847-4 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
Oxide
40
Pan no. 2
0.182 inches
Right-hand
2b
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-057-1660 SCREW,MACHINE
Used on ky-57,5810-00-434-3644. unc thread series oxide screw surface treated 40 thread quantity per inch pan no. 2 head style 0.182" thread length right-hand 2b thread class
- NIIN
- 010571660
- NIIN Date
- 03/08/78
- Schedule B
- 7318152000
- Name Code
- 06657
- FIIG
- A500D0
- Item Weight
- 0.200lbs
- Item Dimensions
- 40 X 20 X 4
- QUP
- 1
- Historical Price
- $2.70 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
- - U.s. Marine Corps
- - Department of The Navy
- - Department of The Army
- - Spain
- - Australia
- - Canada
- - New Zealand
- - France
- - Italy
- - Greece
- - Turkey
Availability for 0N241847-4 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
0N241847-4 / Screw,machineWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
