Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. TP7967 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.475in. ⁓31/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.590in. and 0.610in. ⁓5/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
square extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
0.300in. ⁓5/16"
0.151in. and 0.156in.
0.295in. and 0.305in.
0.095in. and 0.105in.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.062in. ⁓1/16"
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
The number of holes provided.
1
Indicates the type of hole(s) provided in the item.
drilled
Those features,not otherwise specified,which may be required for proper functioning of the item.
finished head
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The style designation that most nearly corresponds to the appearance of the hole configuration.
square flats
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
unthreaded portion of shank 0.185 in. min 0.190 in.mas diameter
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 482
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-B-994, comp b, 1-2 hard mil spec single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Copper alloy 482
32
0.062 inches
Square extended washer
0.475 inches minimum
Right-hand
2a
Schedule B number: 7415338550
nmfc 093460
Other copper screws (not for wood) bolts and nuts
FSC 5306 ⁓ Bolts
NSN 5306-00-270-7352 BOLT,MACHINE
unf thread series unthreaded portion of shank 0.185 in. min 0.190 in.mas diameter 32 thread quantity per inch 0.062" hole diameter square extended washer head style 0.475" thread length right-hand 2a thread class
- NIIN
- 002707352
- NIIN Date
- 01/01/63
- Schedule B
- 7415338550
- Name Code
- 01847
- FIIG
- A003B0
- QUP
- Historical Price
- $2.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Brazil
- - Spain
- - Italy
- - Greece
- - Turkey
Availability for TP7967 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093460 BOLTS/NUTS NOI BBC/ZINC
- UFC (universal freight code)
- 48930
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
TP7967 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
