NAS570-129

NAS570129 Machine Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS570-129 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

3.990in. and 4.007in. ⁓4-1/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

4.020in. and 4.067in. ⁓4-5/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.469in. ⁓15/32"

Width Between Flats

0.990in. and 1.000in.

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.070in. and 0.080in. ⁓3/32"

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.625in. ⁓5/8"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.030in. and 0.060in.

Hole Quantity
The number of holes provided.

6

Hole Type
Indicates the type of hole(s) provided in the item.

drilled

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

18

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

36.0 rockwell c and 40.0 rockwell c

Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration.

hexagon flats

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

finished head

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 or steel comp 4140 or steel comp 8735 or steel comp 8740

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 2 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS570 professional/industrial association standard

Answers.

What class is the thread series?

Unjf

What material is the machine bolt made of ?

Steel comp 4130 or steel comp 4140 or steel comp 8735 or steel comp 8740

What is the thread quantity per inch?

18

What is the grip length?

0.030 inches minimum and 0.060 inches maximum

What is the inside hole diameter?

0.070 inches minimum and 0.080 inches maximum

What is the head style?

Hexagon

What is the thread length?

3.990 inches minimum and 4.007 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for NAS570-129?

5306-01-155-9265

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NAS570-129?

FSC 5306 ⁓ Bolts

NSN 5306-01-155-9265 BOLT,MACHINE

unjf thread series cadmium surface treated finished head 18 thread quantity per inch 0.030" grip length 0.070" hole diameter hexagon head style 3.990" thread length right-hand 3a thread class

NIIN
011559265
NIIN Date
06/16/83
Schedule B
7318152000 
Name Code
01847
FIIG
A003B0
Item Weight
60.000lbs
Item Dimensions
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Egypt 
  • - Republic of Korea 

Major End Items End use applications

  • - Fms unique/oo alc

Availability for NAS570-129 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

NAS570-129 / Bolt,machineWhat is the formal definition of this item?

An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.