Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS568C35 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.034in. and 1.064in. ⁓1-5/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.094in. ⁓1-3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.375in. ⁓3/8"
0.750in.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.070in. ⁓5/64"
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.4643in. and 0.5000in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.5000in. ⁓1/2"
A measurement of the longest dimension of the grip,in distinction from width.
0.030in. and 0.060in.
The number of holes provided.
3
Indicates the type of hole(s) provided in the item.
drilled
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
The style designation that most nearly corresponds to the appearance of the hole configuration.
hexagon corners
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Iron alloy 660
20
0.030 inches minimum and 0.060 inches maximum
0.070 inches
Hexagon
1.034 inches minimum and 1.064 inches maximum
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-625-1947 BOLT,MACHINE
unjf thread series passivate surface treated 20 thread quantity per inch 0.030" grip length 0.070" hole diameter hexagon head style 1.034" thread length right-hand 3a thread class
- NIIN
- 016251947
- NIIN Date
- 01/28/14
- Schedule B
- 7318152000
- Name Code
- 01847
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Lithuania
- - Australia
Availability for NAS568C35 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
NAS568C35 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
