Serving our customers with quality and safety first.
2a
RIGHT-Hand
0.733in. and 0.844in. ⁓27/32"
0.844in. and 0.875in. ⁓7/8"
hexagon
0.195in. and 0.211in. ⁓7/32"
0.489in. and 0.500in.
0.062in. ⁓1/16"
0.312in. ⁓5/16"
1
drilled
finished head
18
70000 pounds per square inch
80.0 rockwell b
hexagon flats
63.0 microinches threads
steel comp 301 or steel comp 302 or steel comp 303 or steel comp 303f or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 323 or steel comp 324 or steel comp 347 or steel comp 348 or steel comp 385
66 fed std all material responses
passivate
QQ-P-35 fed spec single treatment response
unc
1EA
Unc
Steel comp 301 or steel comp 302 or steel comp 303 or steel comp 303f or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 323 or steel comp 324 or steel comp 347 or steel comp 348 or steel comp 385
18
0.062 inches
Hexagon
0.733 inches minimum and 0.844 inches maximum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unc thread series passivate surface treated 18 thread quantity per inch 0.062" hole diameter hexagon head style 0.733" thread length right-hand 2a thread class
1. | 5306008197020 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.