Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS12189-09 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.554in. and 0.625in. ⁓5/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.688in. ⁓45/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
double hexagon w/hole
A measurement from the bottom to the top of the head,in distinction from depth.
0.330in. ⁓11/32"
0.304in. and 0.313in.
0.438in.
0.060in. and 0.070in.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.070in. ⁓5/64"
The national stock number or the identification information of the end equipment for which the item is a part.
C-5 aircraft
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The number of holes provided.
4
Indicates the type of hole(s) provided in the item.
drilled
Those features,not otherwise specified,which may be required for proper functioning of the item.
finished head
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
130000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
248.0 brinell standard and 341.0 brinell standard
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
85000 pounds per square inch
The style designation that most nearly corresponds to the appearance of the hole configuration.
hexagon flats
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches threads
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches bearing surface of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches grip
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bolt, MACHINE-Steel, drilled double hexagon, extended washer, .250-28 (MIL-S-8879 thread)
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5735 assn std single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Iron alloy 660
28
0.070 inches
Double hexagon w/hole
0.554 inches minimum and 0.625 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-507-7396 BOLT,MACHINE
Used on c-5 aircraft. unjf thread series bolt, machine-steel, drilled double hexagon, extended washer, .250-28 (mil-s-8879 thread) 28 thread quantity per inch 0.070" hole diameter double hexagon w/hole head style 0.554" thread length right-hand 3a thread class
- NIIN
- 015077396
- NIIN Date
- 05/05/03
- Schedule B
- 7318152000
- Name Code
- 01847
- FIIG
- A003B0
- QUP
- Historical Price
- $34.88 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for MS12189-09 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
MS12189-09 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
