HLM394PB05

HLM394PB05 Machine Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HLM394PB05 specification

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

11.9 mm and 12.4 mm

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

7.9 mm

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Width Between Flats

9.78 mm and 10.00 mm

Grip Diameter
The length of a straight line which passes through the center of the grip,and terminates at the circumference.

8.65 mm and 8.75 mm

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

tornado

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

5.0 mm

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

7.9 mm

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

4

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

12700 newtons per square millimeter

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

type 303 se stainless steel 1 mm grip VARIATION-Shear application for use on 0.5 and 1 mm oversize H-Lok pins

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ASTMA582 assn std 1st material response or AMS5640 assn std 2nd material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type ii, class 2 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

iso m

Answers.

What class is the thread series?

Iso m

What material is the machine bolt made of ?

Steel corrosion resisting

What is the thread quantity per inch?

4

What is the grip length?

7.9 millimeters

What is the head style?

Hexagon

What is the thread length?

11.9 millimeters minimum and 12.4 millimeters maximum

What is the NSN for HLM394PB05?

5306-01-535-3263

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of HLM394PB05?

FSC 5306 ⁓ Bolts

NSN 5306-01-535-3263 BOLT,MACHINE

Used on tornado. iso m thread series cadmium surface treated type 303 se stainless steel 1 mm grip variation-shear application for use on 0.5 4 thread quantity per inch 7.9mm grip length hexagon head style 11.9mm thread length

NIIN
015353263
NIIN Date
11/23/05
Schedule B
7318152000 
Name Code
01847
FIIG
A003B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. HLM294PB05 Cage U6300
2. HLM294PB-05 Cage 73197

Major End Users Countries and entities

  • - United Kingdom 

Availability for HLM394PB05 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

HLM394PB05 / Bolt,machineWhat is the formal definition of this item?

An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.