Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.407in. and 0.469in. ⁓15/32"
4.469in. and 4.531in. ⁓4-17/32"
hexagon
0.219in. ⁓7/32"
0.428in. and 0.440in.
0.062in. ⁓1/16"
0.250in. ⁓1/4"
4.000in. and 4.124in.
6
drilled
finished head
28
28.0 rockwell c and 33.0 rockwell c
hexagon flats
thd relief 0.090 in. w by 0.224 in. dia; 0.0002 to 0.0003 per in. pitch dia taper, small tapered end at thd relief
steel comp 4130 or steel comp 8630 or steel comp 1330
66 fed std all material responses
cadmium
QQ-P-416, type 2, class c fed spec single treatment response
unf
Unf
Steel comp 4130 or steel comp 8630 or steel comp 1330
28
4.000 inches minimum and 4.124 inches maximum
0.062 inches
Hexagon
0.407 inches minimum and 0.469 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unf thread series cadmium surface treated thd relief 0.090 in. w by 0.224 in. dia; 0.0002 to 0.0003 per in. pitch dia taper, small tapered end at thd relief 28 thread quantity per inch 4.000" grip length 0.062" hole diameter hexagon head style 0.407" thread length right-hand 3a thread class
1. | 8329005 | Cage 19027 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.