Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AN5DD35A specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.443in. and 0.531in. ⁓17/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
3.703in. and 3.750in. ⁓3-3/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.172in. and 0.204in. ⁓7/32"
0.490in. and 0.502in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.309in. and 0.312in.
The national stock number or the identification information of the end equipment for which the item is a part.
fleet combat
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.3125in. ⁓21/64"
A measurement of the longest dimension of the grip,in distinction from width.
3.172in. and 3.203in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
A24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
3220 pounds per square inch
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
2080 pounds per square inch
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bolt, machine - aircraft
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
undrilled
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Aluminum alloy
A24
3.172 inches minimum and 3.203 inches maximum
Hexagon
0.443 inches minimum and 0.531 inches maximum
Right-hand
3a
Schedule B number: 7616106000
nmfc 093486
Threaded fasteners of aluminum
FSC 5306 ⁓ Bolts
NSN 5306-01-499-3774 BOLT,MACHINE
Used on fleet combat. unf thread series undrilled bolt, machine - aircraft A24 thread quantity per inch 3.172" grip length hexagon head style 0.443" thread length right-hand 3a thread class
- NIIN
- 014993774
- NIIN Date
- 07/22/02
- Schedule B
- 7616106000
- Name Code
- 01847
- FIIG
- A003B0
- QUP
- Historical Price
- $64.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for AN5DD35A A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Iron or steel, structural, (less than 35 feet)(see 825)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
AN5DD35A / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
