AN5DD16

AN5DD16 Machine Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. AN5DD16 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.532in. ⁓35/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.844in. ⁓1-27/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.172in. and 0.204in. ⁓7/32"

Width Between Flats

0.490in. and 0.502in.

Shank Unthreaded Hole Diameter
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.

0.076in. first hole

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.312in. ⁓5/16"

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

1.312in.

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

finished head

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

24

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

62000 pounds per square inch

Distance From Head Largest Bearing Surface To Shank Hole Center
The distance from the shank hole centerline to the largest bearing surface of the head.

1.671in. first hole

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 2024 or aluminum alloy 1100 or aluminum alloy 2017 or aluminum alloy 2117 or aluminum alloy 5056

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-267 fed spec 1st material response or QQ-A-268 fed spec 1st material response or MIL-W-7986 mil spec 1st material response or MIL-W-7986 mil spec 2nd material response or MIL-W-7986 mil spec 3rd material response or MIL-W-7986 mil spec 4th material response or MIL-W-7986 mil spec 5th material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

oxide film and anodize

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-C-5541 mil spec 1st treatment response and MIL-A-8625 mil spec 2nd treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What class is the thread series?

Unf

What material is the machine bolt made of ?

Aluminum alloy 2024 or aluminum alloy 1100 or aluminum alloy 2017 or aluminum alloy 2117 or aluminum alloy 5056

What is the thread quantity per inch?

24

What is the grip length?

1.312 inches

What is the head style?

Hexagon

What is the thread length?

0.532 inches minimum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for AN5DD16?

5306-00-151-2131

How is this classified for shipping?

Schedule B number: 7616106000
Threaded fasteners of aluminum

What's the federal classification of AN5DD16?

FSC 5306 ⁓ Bolts

NSN 5306-00-151-2131 BOLT,MACHINE

unf thread series oxide film surface treated 24 thread quantity per inch 1.312" grip length hexagon head style 0.532" thread length right-hand 3a thread class

NIIN
001512131
NIIN Date
01/01/63
Schedule B
7616106000 
Name Code
01847
FIIG
A003B0
QUP
 
Historical Price
$0.10 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Brazil 
  • - Greece 

Availability for AN5DD16 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

AN5DD16 / Bolt,machineWhat is the formal definition of this item?

An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.