Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AN5-10 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.625in. and 1.693in. ⁓1-45/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.078in. and 1.125in. ⁓1-1/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.172in. and 0.204in. ⁓7/32"
0.490in. and 0.502in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.309in. and 0.312in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.312in. ⁓5/16"
A measurement of the longest dimension of the grip,in distinction from width.
0.547in. and 0.578in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bolt, machine, aircraft
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
ultimate tensile strength at root dia. for steel 6500 pounds and for aluminum alloy 3220 pounds; yield tensile strength at root dia. for steel 4980 pounds and for aluminum alloy 2080 pounds; single shear strength at full dia. for steel 5750 pounds and for aluminum alloy 2685 pounds
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel or steel corrosion resisting or aluminum alloy
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
88044-AN5 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
The document designator of the specification or standard which established the item of supply.
88044-AN5 professional/industrial association specification
Answers.
Unf
Steel or steel corrosion resisting or aluminum alloy
24
0.547 inches minimum and 0.578 inches maximum
Hexagon
1.625 inches minimum and 1.693 inches maximum
Right-hand
3a
FSC 5306 ⁓ Bolts
NSN 5306-01-446-9762 BOLT,MACHINE
unf thread series ultimate tensile strength at root dia. for steel 6500 pounds bolt, machine, aircraft 24 thread quantity per inch 0.547" grip length hexagon head style 1.625" thread length right-hand 3a thread class
- NIIN
- 014469762
- NIIN Date
- 07/22/97
- Schedule B
- Name Code
- 01847
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | NASM5 | Cage 80205 |
Major End Users Countries and entities
- - Department of The Navy
- - Brazil
- - Australia
- - Belgium
- - France
- - Germany
- - Republic of Korea
- - United Kingdom
- - Netherlands
- - Italy
Availability for AN5-10 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
AN5-10 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
