Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AIC 874-8-38 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.908in. ⁓59/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
3.268in. and 3.298in. ⁓3-5/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
spline extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
0.440in. and 0.460in. ⁓15/32"
0.922in. and 0.932in.
0.062in. and 0.082in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.4985in. and 0.4995in.
0.644in. and 0.651in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.500in. ⁓1/2"
A measurement of the longest dimension of the grip,in distinction from width.
2.365in. and 2.385in.
Those features,not otherwise specified,which may be required for proper functioning of the item.
finished head
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
220000 pounds per square inch
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
125000 pounds per square inch
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches bearing surface of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches grip
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
flat countersunk center drilling of shank
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 718
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5662 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Nickel alloy 718
20
2.365 inches minimum and 2.385 inches maximum
Spline extended washer
0.908 inches
Right-hand
3a
FSC 5306 ⁓ Bolts
NSN 5306-01-435-7790 BOLT,MACHINE
unjf thread series passivate surface treated flat countersunk center drilling of shank 20 thread quantity per inch 2.365" grip length spline extended washer head style 0.908" thread length right-hand 3a thread class
- NIIN
- 014357790
- NIIN Date
- 09/02/96
- Schedule B
- Name Code
- 01847
- FIIG
- A003B0
- QUP
- Historical Price
- $133.28 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3D0073-8-38 | Cage 88277 |
| 2. | VCG0037-8-38 | Cage 06710 |
| 3. | PBF1594-8-38 | Cage 27624 |
| 4. | 84604-8-38 | Cage 56878 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for AIC 874-8-38 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093490 BOLT/NUT/SCREW/CLIPS/FASTENER/ETC
- UFC (universal freight code)
- 50270
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
AIC 874-8-38 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
