Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 8T4141 specification
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
46.0 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
70.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
13.0 mm
30.0 mm
The national stock number or the identification information of the end equipment for which the item is a part.
mrap
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
20.0 mm
A measurement of the longest dimension of the grip,in distinction from width.
24.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
2.5
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bolt, machine
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
24.0 millimeters
Hexagon
46.0 millimeters
FSC 5306 ⁓ Bolts
NSN 5306-01-359-9326 BOLT,MACHINE
Used on MRAP. unc thread series bolt, machine 24.0mm grip length hexagon head style 46.0mm thread length
- NIIN
- 013599326
- NIIN Date
- 06/16/92
- Schedule B
- Name Code
- 01847
- FIIG
- A003B0
- Item Weight
- 1.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $9.90 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 8T-4141 | Cage Z0939 |
| 2. | 8T-4141 | Cage Z0939 |
| 3. | 8T-4141 | Cage Z0939 |
| 4. | 8T-4141 | Cage Z0939 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - U.s. Marine Corps
- - Australia
- - France
- - Portugal
Availability for 8T4141 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Iron or steel, structural, (less than 35 feet)(see 825)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
8T4141 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
