Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 77C959821P001 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
7.750in. ⁓7-3/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
A measurement from the bottom to the top of the head,in distinction from depth.
0.324in. ⁓21/64"
1.188in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.625in. ⁓5/8"
A measurement of the longest dimension of the grip,in distinction from width.
0.617in. and 0.625in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
11
The included angle of the countersink.
80.0 degrees and 84.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
with between the flats .375 to .379
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
11
0.617 inches minimum and 0.625 inches maximum
Flat countersunk
7.750 inches
2a
FSC 5306 ⁓ Bolts
NSN 5306-01-492-6795 BOLT,MACHINE
unc thread series with between the flats .375 to .379 11 thread quantity per inch 0.617" grip length flat countersunk head style 7.750" thread length 2a thread class
- NIIN
- 014926795
- NIIN Date
- 12/10/01
- Schedule B
- Name Code
- 01847
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $352.78 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 77C95821P001 | Cage 03538 |
| 2. | 77C95821P001 | Cage 03538 |
| 3. | 77C95821P001 | Cage 03538 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 77C959821P001 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
77C959821P001 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
