Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 77720-14-61 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.049in. ⁓1-1/16"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
4.8515in. and 4.8715in. ⁓4-7/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
double hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.469in. ⁓15/32"
1.239in. and 1.252in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.136in. first hole and 0.146in. first hole
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.875in. ⁓7/8"
A measurement of the longest dimension of the grip,in distinction from width.
3.8025in. and 3.8225in.
Those features,not otherwise specified,which may be required for proper functioning of the item.
unfinished head
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
14
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
aasb and anee
The distance from the shank hole centerline to the largest bearing surface of the head.
4.727in. first hole
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches grip
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
125.0 microinches head
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
mark p/n on head surface max 0.01o in. deep
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5758 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel
14
3.8025 inches minimum and 3.8225 inches maximum
Double hexagon
1.049 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-034-2582 BOLT,MACHINE
unjf thread series passivate surface treated mark p/n on head surface max 0.01o in. deep 14 thread quantity per inch 3.8025" grip length double hexagon head style 1.049" thread length right-hand 3a thread class
- NIIN
- 010342582
- NIIN Date
- 01/22/77
- Schedule B
- 7318152000
- Name Code
- 01847
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Greece
- - Turkey
Availability for 77720-14-61 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
77720-14-61 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
