Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2045D86 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.920in. ⁓59/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.760in. ⁓1-49/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
dee chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.800in. and 0.810in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.240in. ⁓1/4"
0.050in. and 0.060in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.094in. first hole and 0.101in. first hole
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.437in. ⁓7/16"
A measurement of the longest dimension of the grip,in distinction from width.
0.600in. and 0.700in.
Those features,not otherwise specified,which may be required for proper functioning of the item.
finished head
The minimum and maximum pitch diameter limits of a nonstandard straight screw thread.
+0.4024/+0.4045in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
26.0 rockwell c and 32.0 rockwell c
The distance from the shank hole centerline to the largest bearing surface of the head.
1.380in. first hole
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8735
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 6320 assn std single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns
Answers.
Uns
Steel comp 8735
20
0.600 inches minimum and 0.700 inches maximum
Dee chamfer
0.920 inches maximum
Right-hand
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-00-298-1091 BOLT,MACHINE
uns thread series 20 thread quantity per inch 0.600" grip length dee chamfer head style 0.920" thread length right-hand
- NIIN
- 002981091
- NIIN Date
- 01/01/63
- Schedule B
- 7318152000
- Name Code
- 01847
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Brazil
- - Republic of Korea
Availability for 2045D86 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
2045D86 / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
