Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 03A510-5-19C specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.582in. ⁓19/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.7545in. and 1.7845in. ⁓1-51/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.635in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.3110in. and 0.3120in.
The national stock number or the identification information of the end equipment for which the item is a part.
aircraft, bomber
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.3125in. ⁓21/64"
A measurement of the longest dimension of the grip,in distinction from width.
1.1775in. and 1.1975in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
260000 pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches fastener
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
bolt head is capped, and cap shall have finish coatings applied to all unbonded surfaces; bolt has ultimate shear strength of 132, 000 psi
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5844 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-L-46010, type i mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Steel corrosion resisting
24
1.1775 inches minimum and 1.1975 inches maximum
Flat countersunk
0.582 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-478-0716 BOLT,MACHINE
Used on aircraft, bomber. unjf thread series passivate surface treated bolt head is capped, 24 thread quantity per inch 1.1775" grip length flat countersunk head style 0.582" thread length right-hand 3a thread class
- NIIN
- 014780716
- NIIN Date
- 08/29/00
- Schedule B
- 7318152000
- Name Code
- 01847
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $690.93 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | CB9294-5-19C | Cage 06725 |
| 2. | CB9294-5-19C | Cage 66530 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 03A510-5-19C A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
03A510-5-19C / Bolt,machineWhat is the formal definition of this item?
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
