Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 9754 specification
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
4.000in. ⁓4-1/64"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.302in. and 0.364in. ⁓3/8"
Width Between Flats
0.725in. and 0.750in.
Shoulder Diameter
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.482in. first shoulder and 0.515in. first shoulder
Shoulder Length
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.156in. first shoulder
Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
60000 pounds per square inch
Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
69.0 rockwell b
Nonmachine Thread Style
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.
gimlet point (type a, ab or ba)
Nonmachine Nominal Thread Diameter
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.
0.500in.
Shoulder Shape
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round first shoulder
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A307, grade a assn std single material response
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
zinc
Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
astm B633 assn std single treatment response
Answers.
What material is the lag screw made of ?
Steel
What is the head style?
Hexagon
How is this classified for shipping?
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
What's the federal classification of 9754?
FSC 5305 ⁓ Screws
NSN 5305-00-412-9789 SCREW,LAG
zinc surface treated hexagon head style
- NIIN
- 004129789
- NIIN Date
- 05/06/70
- Schedule B
- 7318152000
- Name Code
- 36433
- FIIG
- A003B0
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $0.85 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | ASME B18.2.1-1996 | Cage 80205 |
| 2. | MS16992-585-ZE | Cage 96906 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
- - National Aeronautics And Space Administration
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Spain
- - Canada
- - Republic of Korea
- - Greece
- - Turkey
Availability for 9754 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
9754 / Screw,lagWhat is the formal definition of this item?
An externally threaded fastener having a square or hexagon head and with a continuous thread (wood screw type or fetter type) extending from a gimlet or cone point for a distance of slightly more than one-half the length of the screw.
