Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 4J33133-101B specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.600in. ⁓39/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.620in. ⁓2-5/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
round w/wrench flats
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
1.900in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.330in. ⁓11/32"
1.680in.
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
1.2489in. and 1.2494in.
The length of the enlarged portion/s/ located on the shank of the item.
1.140in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.139in. and 0.145in. first hole
1.960in.
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.
0.8750in. and 0.8759in.
The depth of the process used to enlarge part of a hole.
1.300in.
0.561in. and 0.570in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.750in. ⁓3/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
200000 pounds per square inch
The distance from the shank hole centerline to the largest bearing surface of the head.
2.600in. first hole
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
groove on 0.930-0.940 in dia x .120 wide located o relief; hex between relief and threads 0.130 in dia.; surface finish on all shoulders and relief 32.0
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E4340
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5000 mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
counterbore unthreaded
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Counterbore unthreaded
Steel comp e4340
16
Round w/wrench flats
0.600 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-325-5942 BOLT,INTERNALLY RELIEVED BODY
unjf thread series counterbore unthreaded groove on 0.930-0.940 in dia x .120 wide located o relief; hex between relief 16 thread quantity per inch round w/wrench flats head style 0.600" thread length right-hand 3a thread class
- NIIN
- 013255942
- NIIN Date
- 09/07/90
- Schedule B
- 7318152000
- Name Code
- 06676
- FIIG
- A003B0
- Item Weight
- 0.300lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,485.10 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for 4J33133-101B A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Iron or steel, structural, (less than 35 feet)(see 825)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
4J33133-101B / Bolt,internally relieved bodyWhat is the formal definition of this item?
An externally threaded fastener whose external threaded portion is of one nominal diameter. it has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. the concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. the head is designed to be held or driven by an external and/or internal driver. for items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see bolt, fluid passage.
