Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 26-760520-2 specification
The number of single screw threads per inch of the threaded portion.
32 counterbore
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.470in. ⁓31/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.500in. ⁓1-1/2"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.200in. ⁓13/64"
0.619in. and 0.625in.
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
0.4371in. and 0.4373in.
The length of the enlarged portion/s/ located on the shank of the item.
1.030in.
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.
0.096in. first hole
0.460in. and 0.520in.
0.1300in. and 0.1389in.
A measurement of the extent of internal threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.260in. counterbore
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.375in. ⁓3/8"
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unc counterbore
The direction of the internal thread when viewed axially.
RIGHT-Hand counterbore
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
180000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
39.0 rockwell c and 43.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.164in. counterbore ⁓11/64"
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
aavh
The distance from the shank hole centerline to the largest bearing surface of the head.
1.320in. first hole
A numeric-alpha designator indicating the pitch diameter tolerance of an internal thread.
3b counterbore
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium threads
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromium grip
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
CVA5-2 fscm 80378 mfr ref single treatment response head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
CVA5-2 fscm 80378 mfr ref single treatment response threads
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
CVA5-5, type 11b fscm 80378 mfr ref single treatment response grip
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
counterbore threaded
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Counterbore threaded
Steel comp 4130
24
Hexagon
0.470 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-00-224-0069 BOLT,INTERNALLY RELIEVED BODY
unf thread series counterbore threaded cadmium head surface treated 24 thread quantity per inch hexagon head style 0.470" thread length right-hand 3a thread class
- NIIN
- 002240069
- NIIN Date
- 03/27/70
- Schedule B
- 7318152000
- Name Code
- 06676
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $88.88 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - France
Availability for 26-760520-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
26-760520-2 / Bolt,internally relieved bodyWhat is the formal definition of this item?
An externally threaded fastener whose external threaded portion is of one nominal diameter. it has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. the concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. the head is designed to be held or driven by an external and/or internal driver. for items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see bolt, fluid passage.
