MS20007H39

MS20007H39 Internal Wrenching Bolt

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. MS20007H39 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.787in. and 0.837in. ⁓27/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

3.235in. and 3.265in. ⁓3-17/64"

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.740in. and 0.750in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.438in. ⁓29/64"

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.055in. ⁓1/16"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

hexagon

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

spec item

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.438in. ⁓29/64"

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

0.313in. and 0.315in. ⁓21/64"

Hole Quantity
The number of holes provided.

4

Hole Type
Indicates the type of hole(s) provided in the item.

drilled

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

34.0 rockwell c and 40.0 rockwell c

Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration.

round longitudinal hole

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 or steel comp E4340 or steel comp 6150 or steel comp 8735 or steel comp 8740

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5626 mil spec 1st material response or MIL-S-5000 mil spec 2nd material response or MIL-S-8503 mil spec 3rd material response or MIL-S-6098 mil spec 4th material response or MIL-S-6049 mil spec 5th material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2 cl 2 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unf

What material is the internal wrenching bolt made of ?

Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740

What is the thread quantity per inch?

20

What is the inside hole diameter?

0.055 inches

What is the thread length?

0.787 inches minimum and 0.837 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for MS20007H39?

5306-00-612-1056

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of MS20007H39?

FSC 5306 ⁓ Bolts

NSN 5306-00-612-1056 BOLT,INTERNAL WRENCHING

Used on spec item. unf thread series cadmium surface treated 20 thread quantity per inch 0.055" hole diameter 0.787" thread length right-hand 3a thread class

NIIN
006121056
NIIN Date
01/01/63
Schedule B
7318152000 
Name Code
06666
FIIG
A003B0
Item Weight
0.000lbs
Item Dimensions
--
QUP
Historical Price
$56.18 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 

Availability for MS20007H39 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Bolts or nuts (iron or steel),(less than 35 feet) 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

MS20007H39 / Bolt,internal wrenchingWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it is designed with an internal socket or internal multiple spline for use with an internal driver. the head is beveled (conical) or cylindrical in shape. items with cylindrical shaped heads must have an externally relieved body. a locking feature may be incorporated in the design of the head or threads. see also screw, cap, socket head. excludes setscrew; screw, shoulder; bolt, shoulder; screw, externally relieved body; bolt, externally relieved body; and screw, machine.