Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 3268AS131-001 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.560in. ⁓9/16"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
5.340in. ⁓5-11/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.375in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.250in. ⁓1/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
hexagon
The national stock number or the identification information of the end equipment for which the item is a part.
used on electronic warfare systems common to special electronics aircraft
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The shortest straight line between flats,perpendicular to the height.
0.1562in. and 0.1587in. ⁓11/64"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
agav
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
stud
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
inavy:screw, cap.socketthea
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
5EA
Unc
Steel corrosion resisting
20
Flat chamfer
0.560 inches
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-502-4344 BOLT,INTERNAL WRENCHING
Used on electronic warfare systems common to special electronics aircraft. unc thread series passivate surface treated navy:screw, cap.socketthea stud 20 thread quantity per inch flat chamfer head style 0.560" thread length right-hand 2a thread class
- NIIN
- 015024344
- NIIN Date
- 11/06/02
- Schedule B
- 7318152000
- Name Code
- 06666
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 5
- Historical Price
- $30.00 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: D)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 10116307 | Cage A486G |
Major End Users Countries and entities
- - Department of The Navy
- - Finland
- - Spain
- - Australia
- - Canada
- - Norway
Availability for 3268AS131-001 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Rating variable
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
3268AS131-001 / Bolt,internal wrenchingWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it is designed with an internal socket or internal multiple spline for use with an internal driver. the head is beveled (conical) or cylindrical in shape. items with cylindrical shaped heads must have an externally relieved body. a locking feature may be incorporated in the design of the head or threads. see also screw, cap, socket head. excludes setscrew; screw, shoulder; bolt, shoulder; screw, externally relieved body; bolt, externally relieved body; and screw, machine.
