Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 111511-4-8-19 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.469in. ⁓15/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.954in. and 0.984in. ⁓63/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
countersunk cylindrical convex
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.
0.2195in. and 0.2225in.
0.459in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
torx
The national stock number or the identification information of the end equipment for which the item is a part.
F-22 raptor
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.2500in. ⁓1/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
3600 pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches threads
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
32.0 microinches top of head
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches grip
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
six lobe recess bolt, 100 deg flush sealant injection
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
one slot on shank 0.130 in. min by 0.170 in. max width, located 0.190 from top of head; head has internal thread, 0.1380-32 UNJC-3B thread depth from top of head .300-.345 counterbore .145-.150 dia x .130-.140 deep from top of head; 160 ksi ultimate tensile strength
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS4928 fed spec single material response or AMS4967 fed spec single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Titanium alloy uns r56400
28
Countersunk cylindrical convex
0.469 inches
Right-hand
3a
Schedule B number: 8108908000
nmfc 093486
Other wrought titanium
FSC 5306 ⁓ Bolts
NSN 5306-01-642-6245 BOLT,INTERNAL WRENCHING
Used on f-22 raptor. unjf thread series one slot on shank 0.130 in. min by 0.170 in. max width, located 0.190 from top of head; head has internal thread, 0.1380-32 unjc-3b thread depth from top of head .300-.345 counterbore .145-.150 dia x .130-.140 deep from top of head; 160 ksi ultimate tensile strength six lobe recess bolt, 100 deg flush sealant injection 28 thread quantity per inch countersunk cylindrical convex head style 0.469" thread length right-hand 3a thread class
- NIIN
- 016426245
- NIIN Date
- 03/03/15
- Schedule B
- 8108908000
- Name Code
- 06666
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 111511-4-8-19 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
111511-4-8-19 / Bolt,internal wrenchingWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it is designed with an internal socket or internal multiple spline for use with an internal driver. the head is beveled (conical) or cylindrical in shape. items with cylindrical shaped heads must have an externally relieved body. a locking feature may be incorporated in the design of the head or threads. see also screw, cap, socket head. excludes setscrew; screw, shoulder; bolt, shoulder; screw, externally relieved body; bolt, externally relieved body; and screw, machine.
