Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 782481-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.380in. ⁓25/64"
The length of a straight line which passes through the center of the eye and terminates at the inner periphery.
0.192in. and 0.199in.
0.080in.
A measurement of the longest dimension of the shank,in distinction from width.
1.610in.
0.125in.
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
0.500in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.460in. ⁓2-15/32"
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
125000 pounds per square inch
2.210in.
0.500in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
surface machined to 125 microinches; the unthreaded shank is min. 0.369 in. and max. 0.375 in. dia.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8630
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6050 cond F-4 mil spec single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Steel comp 8630
28
0.380 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-00-766-9665 BOLT,EYE
unf thread series surface machined to 125 microinches; the unthreaded shank is min. 0.369 in. 28 thread quantity per inch 2.460" overall length 0.380" thread length right-hand 3a thread class
- NIIN
- 007669665
- NIIN Date
- 01/01/62
- Schedule B
- 7318152000
- Name Code
- 01853
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Italy
- - Greece
Availability for 782481-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
782481-1 / Bolt,eyeWhat is the formal definition of this item?
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. see also bolt, hook. excludes connector, rod end.
