Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.418in. and 0.478in. ⁓31/64"
5.490in. and 5.550in. ⁓5-9/16"
flat chamfer
1.000in.
0.250in. and 0.290in. ⁓19/64"
0.106in. first hole and 0.108in. first hole
0.748in.
0.421in. and 0.428in.
4.922in.
5.072in.
slot
0.500in. ⁓1/2"
20
5.363in. first hole
1
casehardening pertains to lg from largest bearing surface of head to end of first dia
steel
cadmium
unf
1EA
Unf
Steel
20
Flat chamfer
0.418 inches minimum and 0.478 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unf thread series cadmium surface treated casehardening pertains to lg from largest bearing surface of head to end of first dia 20 thread quantity per inch flat chamfer head style 0.418" thread length right-hand 3a thread class
1. | A02C102-1 | Cage 77272 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). it is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. see also bolt, externally relieved body and bolt, internal wrenching.