Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 91035A430 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.219in. ⁓7/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.000in. ⁓1/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
knurled no. 1
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.313in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.313in. ⁓21/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
slotted head captive panel screw
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
size 8-32, class 2a
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Answers.
1EA
Steel
Knurled no. 1
0.219 inches
Right-hand
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-561-1295 SCREW,EXTERNALLY RELIEVED BODY
size 8-32, class 2a slotted head captive panel screw knurled no. 1 head style 0.219" thread length right-hand
- NIIN
- 015611295
- NIIN Date
- 02/26/08
- Schedule B
- 7318152000
- Name Code
- 01852
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $19.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
Availability for 91035A430 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
91035A430 / Screw,externally relieved bodyWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). it is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. see also bolt, externally relieved body and bolt, internal wrenching.
