Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1951-1-3001-1 specification
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.175in. ⁓3/16"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.195in. ⁓13/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat top elevator
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.230in.
0.094in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type ii
The included angle of the countersink.
99.0 degrees
The number of externally relieved diameters on the body,adjacent to the head.
1
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-F-14072 mil spec all treatment responses
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
Steel corrosion resisting
Flat top elevator
0.175 inches
Schedule B number: 7318152000
nmfc 095190
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-071-3852 SCREW,EXTERNALLY RELIEVED BODY
unc thread series flat top elevator head style 0.175" thread length
- NIIN
- 010713852
- NIIN Date
- 02/07/79
- Schedule B
- 7318152000
- Name Code
- 01852
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $34.03 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Defense Logistics Agency
Availability for 1951-1-3001-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- 70.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI SUB 9
- UFC (universal freight code)
- 49790
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
1951-1-3001-1 / Screw,externally relieved bodyWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). it is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. see also bolt, externally relieved body and bolt, internal wrenching.
