Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1843618PC1 specification
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.312in. ⁓5/16"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.000in. ⁓1/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
0.156in.
0.688in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
Answers.
Hexagon
0.312 inches minimum
FSC 5305 ⁓ Screws
NSN 5305-00-690-9627 SCREW,EXTERNALLY RELIEVED BODY
hexagon head style 0.312" thread length
- NIIN
- 006909627
- NIIN Date
- 01/01/61
- Schedule B
- Name Code
- 01852
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3076-1001P1 | Cage 3B150 |
| 2. | 3076-1001P1 | Cage 49956 |
Availability for 1843618PC1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
1843618PC1 / Screw,externally relieved bodyWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). it is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. see also bolt, externally relieved body and bolt, internal wrenching.
