Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 0N220394 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.025in. ⁓1/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.085in. ⁓3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
1.000in. ⁓1/64"
0.375in.
0.220in.
0.059in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard single shear test method.
29150 pounds per square inch
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
w/o internal drive
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
160000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
40.0 rockwell c
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
160000 pounds per square inch
The number of externally relieved diameters on the body,adjacent to the head.
6
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
Aluminum alloy
Hexagon
0.025 inches
Right-hand
Schedule B number: 7616106000
Threaded fasteners of aluminum
FSC 5305 ⁓ Screws
NSN 5305-01-135-5299 SCREW,EXTERNALLY RELIEVED BODY
unc thread series hexagon head style 0.025" thread length right-hand
- NIIN
- 011355299
- NIIN Date
- 07/27/82
- Schedule B
- 7616106000
- Name Code
- 01852
- FIIG
- A003B0
- Item Weight
- 0.300lbs
- Item Dimensions
- 20 X 30 X 1
- QUP
- 1
- Historical Price
- $102.70 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - Department of The Army
- - New Zealand
Availability for 0N220394 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
0N220394 / Screw,externally relieved bodyWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). it is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. see also bolt, externally relieved body and bolt, internal wrenching.
