Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.594in. ⁓19/32"
0.984in. ⁓63/64"
0.245in. and 0.250in.
0.188in. ⁓13/64"
0.312in.
0.245in. and 0.250in.
0.390in.
0.312in. ⁓5/16"
24
26.0 rockwell c and 32.0 rockwell c
90.0 degrees
1
thd pitch dia must be concentric, square and true to body within 0.006 and to taper within 0.004 full indicator readings when mtd on centers or equivalent
steel
ams 6317 assn std single material response
unf
Unf
Steel
24
0.594 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
unf thread series thd pitch dia must be concentric, square 24 thread quantity per inch 0.594" thread length right-hand 3a thread class
1. | 28014 | Cage 0AHP5 |
2. | 28014 | Cage 15555 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). it is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. excludes bolt, internal wrenching and thumbscrew. see also screw, externally relieved body.