Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ST3M760D5-21 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.312in. ⁓5/16"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.312in. ⁓1-5/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat top elevator
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.633in.
The length of a straight line which passes through the center of the grip,and terminates at the circumference.
0.312in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.249in.
A measurement of the longest dimension of the grip,in distinction from width.
0.500in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The included angle of the countersink.
100.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
pin, rivet
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material; steel, cress
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS-QQ-P-35 assn std all material responses
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel
24
0.500 inches
Flat top elevator
0.312 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-570-0307 BOLT,DRIVE SHANK
unjf thread series passivate surface treated material; steel, cress pin, rivet 24 thread quantity per inch 0.500" grip length flat top elevator head style 0.312" thread length right-hand 3a thread class
- NIIN
- 015700307
- NIIN Date
- 12/15/08
- Schedule B
- 7318152000
- Name Code
- 23639
- FIIG
- A003B0
- QUP
- Historical Price
- $17.25 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: Q)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for ST3M760D5-21 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
ST3M760D5-21 / Bolt,drive shankWhat is the formal definition of this item?
An externally threaded fastener, made of high strength metal, whose threaded portion is of one nominal diameter. the unthreaded portion is of a specific grip length, and is ground to a close tolerance in order to provide a drive fit in a specific size hole. it may be plated or unplated. the head is not designed to be driven by a screwdriver or wrench. the item is driven into the parts to be fastened by means of a mallet or similar item.
