Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.656in. ⁓21/32"
2.202in. and 2.249in. ⁓2-1/4"
flat countersunk undercut
0.881in. and 0.888in.
0.130in. and 0.133in. ⁓9/64"
0.436in. and 0.437in.
HIGH-Torque
cbil for c/d/
0.438in. ⁓29/64"
1.562in.
20
99.0 degrees and 101.0 degrees
32.0 microinches grip
32.0 microinches threads
navy special project
steel comp XM-13
AMS5629, comp XM-13 assn std single material response
passivate
QQ-P-35 fed spec single treatment response
unjf
Unjf
Steel comp xm-13
20
1.562 inches
Flat countersunk undercut
0.656 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
Used on cbil for c/d/. unjf thread series passivate surface treated navy special project 20 thread quantity per inch 1.562" grip length flat countersunk undercut head style 0.656" thread length right-hand 3a thread class
1. | 11925C7-25D | Cage 59563 |
2. | HT4020-7-25D | Cage 06950 |
3. | HT2040-7-25D | Cage 73197 |
4. | HT2040-7-25D | Cage 80539 |
5. | WC4020-7-25 | Cage 60516 |
6. | HT2040-7-25D | Cage K5673 |
7. | HT2040-7-25D | Cage L4528 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.