Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.406in. ⁓13/32"
1.406in. ⁓1-13/32"
oval countersunk
0.2966in. and 0.3016in.
0.1890in. and 0.1895in.
HIGH-Torque
fuselage
0.190in. (UTS #10)
1.000in.
32
99.0 degrees and 101.0 degrees
SCREW-Close tolerance, 100 degree countersunk, reduced head, HI-Torque, nonmagnetic cres (125 ksi fsu)
nickel alloy 718
ams 5662 assn std single material response
passivate
QQ-P-35 fed spec single treatment response
unjf
1EA
Unjf
Nickel alloy 718
32
1.000 inches
Oval countersunk
0.406 inches
Right-hand
3a
Schedule B number: 7508900000
nmfc 096640
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5305 ⁓ Screws
Used on fuselage. unjf thread series passivate surface treated screw-close tolerance, 100 degree countersunk, reduced head, hi-torque, nonmagnetic cres (125 ksi fsu) 32 thread quantity per inch 1.000" grip length oval countersunk head style 0.406" thread length right-hand 3a thread class
1. | HT4027-3-16 | Cage 06950 |
2. | HT4027-3-16 | Cage 56878 |
3. | 11923-3-16 | Cage 59563 |
4. | ST3M557 | Cage 76301 |
5. | HT4027-3-16 | Cage 06725 |
6. | HT4027-3-16 | Cage 17446 |
7. | HT4027-3-16 | Cage 27624 |
8. | WC4027-3-16 | Cage 60516 |
9. | HT4027-3-16 | Cage 73197 |
10. | HT4027-3-16 | Cage 80539 |
11. | HT4027-3-16 | Cage 92215 |
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.