Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.323in. ⁓21/64"
1.183in. and 1.213in. ⁓1-7/32"
fillister countersunk
0.266in. and 0.303in.
0.049in. ⁓1/16"
0.1885in. and 0.1895in.
cross recess type 1
0.190in. (UTS #10)
0.865in. and 0.885in.
32
99.0 degrees and 101.0 degrees
bolt, 100 degree reduced head, phillips recess, close tolerance, A-286, short thread
steel corrosion resisting
ams 5731 assn std single material response or ams 5737 assn std single material response
cadmium
ams QQ-P-416, type ii, class 2 assn std single treatment response
unjc
80205-NAS-8703 professional/industrial association standard
Unjc
Steel corrosion resisting
32
0.865 inches minimum and 0.885 inches maximum
Fillister countersunk
0.323 inches
Right-hand
3a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjc thread series cadmium surface treated bolt, 100 degree reduced head, phillips recess, close tolerance, a-286, short thread 32 thread quantity per inch 0.865" grip length fillister countersunk head style 0.323" thread length right-hand 3a thread class
Nothing similar to this part number was found in our inventory
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.